Reviews 3d Printer Boards 2

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Gray - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Dark Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any R....
Check Stock

3Dman Filament Spool Holder Bracket for Material TPU/PLA/ABS/Nylon/Wood 0.5KG 1KG for 3D Printer

  • 【Material】The 3D printer filament holder is made of high quality metal and plastic, sturdy and durable, long service life. Fine workmanship, small size, easy to carry and store..
  • 【Easy Installation】1 x 3D printer filament holder, 2 x M4 T-nuts, 2 x M4x6mm screws. Filament installation is easy and fast, using 2 M4 screws to fix, stable and not loose..
  • 【Convenient and durable】60° tilt angle for smoother feeding. Stand reinforced design, hard strength, durable..
  • 【Widely used】Suitable for 0.5kg or 1kg and below TPU/PLA/ABS/Nylon/Wood 1.75mm 3.0mm 3D printer consumables..
  • 【Application Scope】 Suit for 2020, 2040 aluminum frame type 3D printer, Ender 3 series, CR-10 series..
Check Stock

CDMZJJ PLA 3D Printer Filament, 1.75mm 3D Printing Consumables Bundle 1KG/2.2lb, 0.25KG/Spool 4 Colors Pack - Black, Blue, White, Red

  • 4 in 1 Bundle 3D Printer Filament: Comes with 1KG/2.2lb 3D printer filament with 4 most popular colors: blue, black, white, red. 4 spools in one package, packed in vacuum sealed bag, each spool filament net weight is 0.25KG/0.55lb..
  • Dimensional Accuracy & Consistency: PLA 3D Printer Filament, 1.75mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing..
  • Premium PLA Filament: Eco-friendly and low odor, tangle-free, clog-free, bubble-free, melt well and feed smoothly, perfect 3D Printer PLA filament for smooth and stable 3D printing experience, provides excellent surface finish of printed parts..
  • Wide Compatibility: 1.75mm diameter printing filament, works perfectly with diverse 3D printers and 3D printing pens that use 1.75mm filament on the market..
  • 3D Printer PLA Filament Using Tips: Recommended printing temperature: 200?-230?. Recommended printing speed: 50-100mm/s for better printing results..
Check Stock

MakerBot SKETCH 3D Printer

  • MakerBot SKETCH: Ideal 3D Printer for Home and Education, MakerBot Cloud file management and hundreds of lessons plans, help you maximize student engagement and enable more classroom printing, teacher and student certifications.
  • Reliable, Tinker-Free 3D Printer: Classroom and home friendly design with enclosed chambers, built-in particulate filters, and heated, flexible buildplates.
  • ISTE-certified, 3D Printer Online Training: Self-paced online courses include 2 MakerBot Certification seats for teachers and 10 seats for students covering printer operation, design-thinking and more.
  • Cloud-based, file management: Easy-to-use file management dashboard via MakerBot Cloud allows you to access and manage printing queues between printers from anywhere wirelessly.
  • integrates easily with TinkerCad & Fusion 360**.
  • 600+ lesson plans: Curated from the largest 3D printing community for educators.
Check Stock

Haitronic 120pcs 20cm Length Jumper Wire/Dupont Cable Multicolored(10 Color) M to F, M to M, F to F Each 40pin for Prototype Breadboard/DIY/Raspberry Pi 3, 4/Orange pi/BBC Micro: bit/Makey makey

  • 10 different colors, 120units copper cable in total, for making prototypes with arduino boards, stepper motor 3D printer etc, The combinations provide a jumper for whatever you need. Just peel off.
  • Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection..
  • 0.127mm, 36 AWG/ single root, 20cm(7.87inch)/axis.
  • Can be detached into120 single axis: 40 male-male, 40 male-female, 40 female-female..
  • Computers and smart phone maintainance, Various prototyping, such as Arduino/Maker/3D printer control board, DIY experiment needs frequently, If the terminals does not damaged it can be reused, if damaged can also be used for soldering..
  • It’s easy to separate the cables if you need to, but they feel like quality jumper cables.
Check Stock

Interface Plate Keypin - Wanhao Duplicator i3 Plus/Maker Select Plus

  • Compatibility: the printer nozzles fit for FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
  • Package include: totally 8 pcs MK10 Nozzle, 7 sizes: 1 x 0.2mm, 1 x 0.3mm, 2 x 0.4mm, 1 x 0.5mm, 1 x 0.6mm, 1 x 0.8mm, 1 x 1.0mm..
  • Size: the 3D printer nozzles, Out Thread: M7, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm..
  • Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M7 out thread, easy to use..
  • Aokin 3D printer nozzles use high-quality raw materials and fine workmanship, if you have any questions about our product, please feel free to contact us, we will do our best for you..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm White ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm White ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: White - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock