Reviews 3amp 12volt Locking Connector
SEFEPODER Replacement Battery for Peg Perego Ride-On Toys 12-Volt Battery, 12V 8Ah Lifepo4 Lithium Ion Chargeable Battery, Built-in BMS
- 【100% Compatible】Fully compatible with all Peg-Perego ride-on toys 12-Volt batteries..
- 【Safe and reliable】SefePoder LiFepo4 batteries have built-in BMS protection against overcharge, overdischarge, overcurrent and short circuit circuits, 6A fast charging and output discharge up to 10A continuous and 10C pulses..
- 【Long service life】Lithium-ion batteries have no problem with more than 3000 cycles, while traditional lead-acid batteries only have 200-300 cycles,The batteries are only 1/3 of the weight of lead-acid batteries of the same capacity!More safety and environmentally friendly than lead-acid batteries..
- 【Harness Connector】12AWG heavy duty cable, including 3 replaceable 40AMP fuses,This wire harness connector can safely connect to a standard 12 volt SLA and lithium battery to your peg perego vehicle..
- 【What You Get】1*12V 8Ah LiFePO4 battery and 1*harness connector. 12 months warranty, if you have any problem, please feel free to contact us (please use the special charger for LiFePo4, it may not be full with automatic SLA charger)..
Check StockDumble L5-30R Connector with RV Power Cord Cover & Ring – 30 Amp Twist Lock Inlet Locking Plug Protector 30A 125V
- KEEP CORDS SAFE: The Dumble RV Supplies | 30 Amp Locking Connector with Cover Boot and Ring is designed to secure and protect your cord connector and....
- USE YOUR CONNECTOR: Quickly locks the cord set in the inlet.
- Side grips for an easy and secure connection.
- Designed for use with round jacketed, hard....
- PERFECT SIZE: 7.5-inch (19.1cm) assembly overall length.
- Cover and ring – 1.75-inch (4.4cm) inner diameter (ID).
- BUILT TO LAST: Cover constructed with a bright yellow rubber body and black heavy-duty plastic ring for extra longevity with no leaks.
- Remove housing by loosening face screws, slide weather-resistant boot over cable, and slide housing over cable.
Check StockABN L5-30R Connector with RV Power Cord Cover & Ring – 30 Amp Twist Lock Inlet Locking Plug Protector 30A 125V
- KEEP CORDS SAFE: The ABN 30 Amp Locking Connector with Cover Boot and Ring is designed to secure and protect your cord connector and keep a....
- USE YOUR CONNECTOR: Quickly locks the cord set in the inlet.
- Side grips for an easy and secure connection.
- Designed for use with round jacketed, hard....
- PERFECT SIZE: 7.5-inch (19.1cm) assembly overall length.
- Cover and ring – 1.75-inch (4.4cm) inner diameter (ID).
- BUILT TO LAST: Cover constructed with a bright yellow rubber body and black heavy-duty plastic ring for extra longevity with no leaks.
- Remove housing by loosening face screws, slide weather-resistant boot over cable, and slide housing over cable.
Check StockUpBright 12V AC/DC Adapter Compatible with Pulse Performance Revster 200 164235 169590 169878 164253 200s 169974 Razor E100 170018 E200 165715 160966 161909 161149 GRT-11 RK-9 164234 Scooter Charger
- (⚠️Output 12V. NOT for 24V ❌ version. NOT for 6V ❌version. with ✅ Barrel Round Plug Tip. NOT 3-Prong ❌Connector end. Someone may have bought it by mistake. Please Check For Compatibility With Your Unit. Thanks.) World Wide Input Voltage 100-240VAC 50/60Hz OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). UpBright 30 days money back guarantee. 1 full year service warranty..
- UpBright New Global 12V AC / DC Adapter Compatible with Pulse Performance Products PP PPP Revster 164235 200 Item # 169590 169878 164253 Freewheel 200s 169974 Razor E100 170018 E200 Dura Street 165715 Rechargeable Electric & Kick Neighborhood Scooter 12 Volts 12VDC DC12V 12.0V 12 VDC 12 volt Switching Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU (⚠️!!!Tips: w/ Barrel Round Plug Tip. NOT for 24V ❌ version. Please Check For Compatibility With Your Unit. Thanks.).
- Compatible with: Pulse Performance Revster 200 Electric Scooter.
- Pulse Performance Revster 200 Rechargeable Electric & Kick Neighborhood Scooter.
- Pulse Performance Revster 200 Electric Scooter 169590.
- Pulse Performance Revster 200 Electric Scooter Razor E100 170018.
- Pulse Performance Revster 200 Electric....
Check StockMICTUNING Backlit Led Light Bar Symbol Push Button with Wiring Kit On-off Switch Replacement for Toyota White Surface Size 1.54 x 0.83 inches - M0810-T-LLBW
- PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car.....
- HIGH QUALITY - Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a....
- STURDY DURABILITY - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.54" x 0.83". It has....
- EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the....
- WIDE APPLICATION - The switch compatible with most model Toyota's vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits....
Check StockVanco 280704 HDMI 1 x 4 Splitter/Extender
- Input/output connector type: HDMI (19-pin).
Check StockDuroMax New XP12000E Generator, Blue & Conntek 1450SS2-15 50 Amp Temp Power Generator Cord, 15 Feet, Black
- Product 1: POWERFUL DUROMAX ENGINE: The XP12000E is Powered by a DuroMax 18HP, 457cc DuroMax OHV Engine.
- Product 1: PLENTY OF POWER: With 12,000 starting watts and 9,500 running watts, this unit can handle heavy loads from lights and a refrigerator to a home air conditioner and high amperage power tools.
- Product 1: MX2 TECHNOLOGY: With DuroMax MX2 technology, get the maximum power from each of the 120 Volt receptacles.
- Choose between operating the generator at both 120V and 240V simultaneously, or at 120V only with full power.
- Product 1: LOW OIL SHUT-OFF: Protects your investment by automatically shutting the generator off when it senses that the oil is low..
- Product 2: Plug (Male): NEMA 14-50P, 50-Amps, 125/250-Volts, 15 feet.
- Product 2: Receptacle (Female): NEMA SS2-50R, 50-Amps, 125/250-Volts, Locking Style.
- Product 2: Maximum Wattage: 12,500 Watts.
- Product 2: Enables a connection for straight-blade 50 amp outlet to a locking 50 amp inlet.
Check StockRonghang 12V 0.5A LED Transformer Replacement LED Controller Power Supply Adapter for 12V Plug LED String Light, Christmas Light (12V 6W), Black
- ▶Input Voltage: AC 120V, 60Hz 0.2A, Output Voltage :DC12V, 0.50A, Rated Watts 6W. Output Voltage Accuracy Up to 100%, Voltage Regulation Up to 100%. Please check the current, voltage and connector of your equipment if it fits this power supply. .
- ▶Raintight IP44 (not completely waterproof) it can be used for indoor and outdoor., need to mount the unit at a height greater than 1 foot from the ground surface. ▶Wide Application: The 12V 6W LED class 2 power supply fits for low voltage LED device, such as christmas trees light, string light, projector light, holiday lighting with output 12V 6W..
- ▶Steady On Mode: This class 2 power only with steady on lighting mode, and it only work for steady on led light, if use it for flash lighting, it can’t work..
- ▶Wide Application: The 12V 6W LED class 2 power supply fits for low voltage LED device, such as christmas trees light, string light, projector light, holiday lighting with output 12V 6W..
- ▶Warm Tips Before order: Please check the output volt, currents, watts and connector if it fits for your device or not before your purchase, if the output volt, watts different with your original adapter, or the connector is different with your original adapter, don’t order it..
Check StockLAMPVPATH (Pack of 5) I-Type 9V Battery Connector, 9 Volt Battery Clip, 9V Battery Clip Connector with Wire and Hard Buckle Plastic Housing
- Package: Includes 5 pcs I TYPE 9v battery connector.
- All these 9 volt battery connectors are with bare leads, all these 9 volt battery clip are with hard buckle plastic housing, no 9V battery is included in the package..
- Good Material of 9v battery clip: Very Hard Plastic ABS and Metal to make the sturdy house for 9v battery snap connector.(Means these 9v battery clip connector is designed not easy to pull apart when removing from the battery, they have longer life than other 9v snap connector that are just fixed on soft material).
- Size of 9 volt battery clips with wires( Each ): 2.4 x 1.2 x 0.7cm/0.94" x 0.47" x 0.28" with wire length approx. 15 cm/ 5.9 inches.
- Connection wires color of 9v connector: black and red..
- Function: These 9 volt battery connectors with clips are easy replace a broken battery connector on your electronic device, making removable power connections in home projects, they should be part of any experimenter or maker's kit..
- Attention: All these 9 volt battery clip connector are only suitable for 9v battery and 9v battery holders, please make sure this when buying this item, please do not apply them when your hands are wet..
Check Stock