Reviews 3 way Plug Valve

Blow off valve mod plug Turbo Hiss compatible for ford 13-21 F150 Ecoboost 3.5l 2.7l VTA(black)

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temp....
Check Stock

QiQibaby 300 Mg/h Aquatic 2 Mini Spa Ozone Generator Water Sterilzier Ozonator for Private Pool & Hot Tub AMP Plug

  • Power Consumption: 6 W, Ozone generators are a common and effective way to oxidize airborne odors and remove contaminants from water. Ozone is 3,000....
  • Ozone Output: 300 mg/h, The Aquatic Ozone Generator produces 300 mg/hour of ozone gas. The output is standardized with 1 LPM oxygen flow rate. Because....
  • Power Connection Type: AMP plug, Universal Plug Type: The Aquatic Ozone Generator can be wired for 110v or 220v. Set up instructions are included in....
  • Package Size: 10.2 × 5.1 × 3.7inch / 26 × 13 × 9.5cm, Portable for home pool spa.
  • Quick Installation: The Aquatic is pre-assembled and ready to install. User manual, check valve, 5 feet of soft black tubing, four hose ties and two....
Check Stock

Cal-Van Tools 39300 Ford Triton 3 Valve Insert Set 1 Pack Brown

  • For use with 2004-2008 Ford three valve 5.4 L and 6.8 L engines built before 10-9-07 and 3 valve 4.6 L engines built before 11-30-07 found in many....
  • The spark plug tends to break off in the cylinder head during maintenance. If this problem is not repaired properly it can result in damaged or....
  • Includes 8 inserts, core drill, tap, guide and insert plug..
Check Stock

ZHSMS Valve Stem Removal Tool - 20Pcs Valve Cores, 10Pcs Tire Valve Caps, 4-Way Valve Tool, Valve Core Remover Tool

  • What You Get - 3 x valve core remover, 1 x 4-way valve tool,10 x valve stem caps ,20 x valve cores..
  • Easy to Use - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool..
  • Portable & 4 Functions - The valve stem tool is easy to use and portable without occupying any space. The single and double head valve stem tools easy to remove and install. In addition to this, the 4-way valve tool also has the functions of pulling the valve stem, deflating the tire, and cleaning the threads. You can choose a stem tool operation according to any..
  • Wide Application - Our single and double valve stem tools are suitable for a variety of standard valve cores, including cars, trucks, motorcycles, etc. 4-way tire valve stem tool suitable Schrader valve. You can use this valve stem tool to cope with the sudden situation of many car tires..
  • Essential Tool - It's always a good idea to keep some spare valve cores and valve tool handy, ZHSMS valve core toolset is your best choice.We 'll provide 360 days no excuse return, if you have questions about this valve stem tool, please contact us, our services make customers 100% satisfied..
Check Stock

BUZIFU 2pcs Air Valve Inflatable Boat Spiral Air Plugs One-way Inflation Replacement Screw Boston Valve for Rubber Dinghy Raft Kayak Pool Boat Airbeds,Black

  • ✑【High Quality】:Made of quality high dense ABS plastic, sturdy, anti-corrosion and durable..
  • ✑【Cap Desgin】:The air valve cap design is sealed ensures anti-leak inflation. The upside diameter/length of Threaded part is 22mm (out)/ 17mm(inner), the underside diameter/length of Threaded part is 22mm (out)/ 20mm(inner) .Please check size to make sure whether your valve bung fit this plug before purchase..
  • ✑【Special Rubber Pad】:The bottom of the air plug has a rubber mat which can prevent leaks more effectively,give you safer protection.One-way inflation valve, quickly inflated..
  • ✑【Quickly Inflation & Deflation】: It will fit into a hole that is about 20mm/0.78 inch, boston valve to help quicker inflation and deflation.Easy to fit, good performance and long serve life..
  • ✑【Come in Pair】: Good replacement accessory for your inflatable boat. Fits most inflatable boat, raft, rubber dinghy, etc. Pl pay attention to the size before purchase, and our gas nozzles are not all suitable for all sizes of airbeds and inflatable boats, special size not applicable, like netted ship..
Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

  • SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
  • POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
  • HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
  • FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
  • TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..
Check Stock

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

  • High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
  • Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
  • The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
  • The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
Check Stock

Swimables Valve Insert Replacement for All Jandy 2 Way and 3 Way Valves - Neverlube Diverter Valve Kit 4720 Replacement for Zodiac 2 Port or 3 Port

  • Perfect Fit: Fits all Jandy NeverLube 2 and 3 Port Valves and Jandy Gray 2 and 3 Port Valves. Perfectly fits Zodiac Never Lube Valves.
  • Installation: Make sure that the pump is turned off. Remove the 8 screws on top of the new valve and lift out the Diverter Valve Assembly..
  • Installation: Replace the Diverter Valve Assembly into the Valve and tighten it down with the 8 screws. Make sure the Valve Assembly is inserted the same way as it was with the "INLET" label positioned on the middle port where the water comes in. If you insert the Valve any other way, you run the risk of shutting off all water to this valve..
  • Kit Includes: This kit includes (1) diverter valve assembly, (2) Shaft Orings, (1) Cap Oring and (1) Valve Knob. Excellent Aftermarket Replacement.
  • 100% Satisfaction Guarenteed: Buy with confidence, as our premium quality diverter valve insert is built to last, and if you're not satisfied with it at any time within 30 days of purchase, we'll provide a refund or replacement..
Check Stock