Reviews 3 phase Motor Driver

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

ATO 7.5 hp 5.5kW VFD, 110V Input 220V Output, 23A , Single Phase to 1phase/3phase Variable Frequency Drive, for Motor Speed Control

  • Extra-low motor noise offers excellent quietness..
  • Suit for 3-Phase Nema 17, 23 and 34 Stepper Motor..
  • Output Current: 1.0 ~ 8.0A, Supply Voltage: 18 ~ 50VDC..
  • Application areas: engraving machine, filature, wire-stripping machine, marking machine, cutting machine, die bonder, plotter, numerical control machine, automatic assembly equipment etc..
Check Stock

ATO 3 hp 2.2kW 10A VFD, Single Phase 120V Input, 1phase/3phase 220V Output Variable Frequency Drive Motor Control

  • ATO 3 hp (2.2 kW) VFD, single phase 110v/120v input, single phase or three phase 220v output variable frequency drive, specially designed for 120v power supply.
  • 【voltage&frequency】Input voltage : 1 phase 120V AC ±15%.
  • Output voltage: 1 phase or 3 phase 220V AC ±15%.
  • 【APPLICATION】: ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】: If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
  • SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..
Check Stock

Kiro&Seeu 2PCS DC5V 28BYJ-48 Geared Stepper Motor with ULN2003 Drive Boards Blue for Arduino (5V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

Evaporative Cooler Motor, 115V, Cradle

  • Price For: Each Hz: 60 Motor Service Factor: 1.00 Motor Bearings: Ball Standards: UL, CSA Motor Enclosure Design: Open Dripproof Ring Dia.: 2-1/2" Resilient Ring Dia.: 2-1/2" Ins. Class: B Phase: 1 Max. Ambient Temp.: 40 Degrees C Length Less Shaft: 7-15/16" Motor Sub Application: Evaporator Cooler Motor Application: HVAC/R Ring to Ring Center: 7-7/16".
  • Ambient Temperature: 40C Item: Evaporative Cooler Motor Motor Thermal Protection: Auto Motor Design: Split-Phase Motor Mounting Type: Cradle Base No. of Speeds: 2 Shaft Dia.: 5/8" Frame: 56 Voltage: 115 Shaft Length: 1-7/8" Overall Length: 9-13/16" Nameplate RPM: 1725/1140 HP: 3/4, 1/3 Voltage Compatibility: 115, 120, 115/208-230, 115/230, 120/240 Full Load Amps: 9.8/6.4.
  • Motor Shaft Rotation: CW/CCW Country of Origin (subject to change): China.
Check Stock

GRV8-03 Monitoring Relay, 176V-552V Ultrasmall Three Phase Voltage Relay Voltage Monitoring Relay Adjust for Mobile Device Connection Control(M265)

  • Small Size: 2021 Improved Version, This 3-Phase Monitoring Relay has a smaller compact size for easier and convenient use and install, and the size of the Monitoring Relay is 8.1 x 6.7 x 1.75 cm/3.1 x 2.6 x 0.6 inch, you can install it on any places around the room, saving a lot of place.
  • Multi-functioanl: This DPA51CM44 3-Phase Monitoring Relay has a widely use on the electric filed, and it can be applied to motor protection, elevator, air conditioning system, power system and other industries, very helpful tool during daily life.
  • Work Well: DPA51CM44 3-Phase Monitoring Relay features with strong anti-interference performance, so it helps maintain a constant and efficient work of the motor, it will provide an excellent performance during the working process.
  • 3-Phase Design: This Current Monitoring Relay is designed with 3-Phase Monitoring Relay to provide a correct phase sequence, without neutral, phase Loss and Incorrect phase sequence, so it can detect when all phases are present and have the correct sequence.
  • LED Indication: This DPA51CM44 Monitoring Relay features an LED indication for easier installation and trouble shooting, which permits a maximum degree of protection to be achieved for machines, plants and systems, and avoid far more significant....
Check Stock

4 Axis Stepper Motor Nema 23 Dual Shaft 425oz-in 112mm+CW5045 Driver 4.5A 256 Microstep+5 Axis Breakut Board+400W 36V Power Supply CNC Controller Kit for CNC Router Engraver Milling Machine

  • ♞【Stepper Motor】4pcs 23HS2430B nema23 stepper motor.
  • ♞【Stepper Motor Driver】4pcs CW5045 driver, current: 1.3A-4.5A.
  • Driver microstep: 1 (1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5,....
  • ♞【Control Board】1pcs 5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】1pcs 400W,36V/9.7A switching power supply.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile....
Check Stock

Digital Phase Indicator , Akozon SP8030 Digital Phase Rotation Indicator LED Buzzer Phase Sequence Meter 200 ith Bag

  • It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
  • Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
  • Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
  • PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
  • It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check Stock