Reviews 3 in 1 Voltage Tester

TopDiag BT200 Car Battery Tester, 12V 24V Load Tester, 100-2000 CCA Automotive Charging Cranking System Tester Digital Auto Battery Analyzer for Car Truck Motorcycle SUV Boat (BT200)

  • ... [Fast & Accurate Detection]➤ The digital battery tester automotive has a built-in millisecond level custom integrated chip and uses advanced conductivity technology to directly present the battery's state of health (SOH), state of charge (SOC), test result display value with actual voltage, rated CCA value, measured CCA value, and resistance value in a digital display. It only takes 3 seconds to display the test results with 99.6% accuracy..
  • [Battery & Cranking & Charging & Wave Test]➤ Compared with other automotive battery testers, this car battery analyzer has added 1 more mode, and there are 4 test modes in total. The battery cca tester can not only test the startup of the starter system, but also monitor the battery health of the charging system and the waveform of the voltage. No longer have to drive miles to the repair shop to get it checked, which is convenient and money-saving for you..
  • [Easy to Operate]➤ The red clip of the TopDiag Car battery tester 12v battery analyzer is connected to the positive "+", and the black clip is connected to the negative "-". Select the corresponding test mo....
Check Stock

HILTEX 40508 Digital Multimeter | Diode and Transistor Tester | AC/DC Volt Test | Audible Continuity | Test Probes | Voltmeter | Multitester Meter |Volt/OHM Meter (VOM) | Measure Voltage Test

  • METER TESTER: A portable, general purpose digital volt meter multimeter to test wires, batteries, cells, fuses and other electrical components..
  • VOLTAGE TESTER: A safe and accurate voltage and current tester for troubleshooting electrical problems in automotive and household settings. Check for battery quality, automotive circuits, and charging systems..
  • LARGE DISPLAY: Includes large, easy-to-read LCD screen that measures 3-1/2 digits and accurately measures resistance, current and voltage with maximum reading up to 1999..
  • TEST LEADS: Red and black leads to test electrical system components including diodes, transistors, wires, fuses, and battery testing on electrical equipment..
  • ENSURE SAFETY: Built-in overload protector keeps the meter from any possible damage, Checks continuity of wires, fuses, and electrical components. Overload indicator and low battery indicator..
Check Stock

IDEAL INDUSTRIES INC. 61-076 Vol-Con Solenoid Voltage Tester with Vibration Mode, AC/DC Voltage Level Testing, CATIII for 600v

  • SAFETY VOL-CON DESIGN: Dual voltage indication for backup safety. Independent solenoid and electronic circuitry design provides back-up voltage indication for added safety..
  • MANY APPLICATIONS: Vol-Con Voltage/Continuity Tester can be used for locating blown fuses, finding the grounded side of the line, checking continuity of cords, motors, appliances, etc., or locating excessive leakage to ground..
  • LED INDICATOR: Easy to read voltage tester. Bright, long-life LEDs and neon indicator lamp..
  • VIBRATION MODE: The IDEAL voltage tester features a vibration mode with indicator movement for clear and accurate testing..
  • ULTRA-DURABLE CONSTRUCTION: The Vol-Con Tester is extremely rugged and reliable. Ultrasonically welded and O-ring sealed for added durability..
  • Extremely rugged and reliable three-in-one tester.
Check Stock

Non-Contact Voltage Tester/ Voltage Tester with Dual Range AC 12V-1000V/48V-1000V, Live/Null Wire Tester, ENGiNDOT Electrical Tester with LCD Display & Buzzer Alarm, Wire Breakpoint Finder-VT02(Black)

  • 【DUAL RANGE】The circuit tester accurately detects standard and low voltage (12-1000V AC / 48-1000V AC), which is more sensitive and flexible. Low sensitivity can probe power supply lines such as power boards, desk lamps, computers, etc., and high sensitivity can detect buried walls and other internal wiring detection (depth≤1.18 inches). The electronic pen can beep from low, medium, and high frequency to indicate voltage..
  • 【SAFETY FIRST】The live wire detector detects voltage in a non-contact way, and insulation operation can ensure the safety of testers. Safety Compliance: CAT.III 1000V CAT.IV 600V.
  • 【MULTIFUNCTION, EASY TO USE】The LED flashlight with high brightness can illuminate your workspace in the dark. In addition, the sound, light, and screen display triple alarms, and the voltmeter buzzer alarms loudly, allowing you to feel the voltage visually and audibly..
  • 【High Efficiency】As long as voltage is detected, the Led in the tester pen will shine..
  • 【COMPACT DESIGN】 The electrical tester uses 2 * 1.5 V AAA batteries (included), which will automatically Power Off in 3 minutes without operation to save energy. What's more, the small-sized body and portable pencil pen hook allow you to carry the item in your pocket..
Check Stock

ANCEL BST200 12V Car Battery Load Tester with ANCEL PB100 Automotive 12/24V Circuit Tester Probe

  • Includes: 1 x BST200 Battery Tester, 1x PB100 Circuit Tester.
  • Works on automotive 12V 100 - 1100 CCA lead-acid batteries, including regular flooded, AGM flat plate, AGM spiral, and GEL batteries for cars, SUV, motorcycle, light truck, and more..
  • Gives you an accurate result in only 3 seconds, such as CCA value, CCA rating, voltage, internal resistance, state of health, and state of charge, based on the rating standard of CCA, CA, MCA, JIS, DIN, IEC, EN and SAE..
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
Check Stock

Klein Tools NCVT-4IR Non-Contact Volt Tester, 12 - 1000V AC Pen with IR Thermometer & RT250 GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets

  • Product 1: Voltage Tester designed specifically for HVAC applications.
  • Product 1: Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems.
  • Product 1: Detects AC voltage from 12 to 1000V with visual and audible indicators.
  • Product 1: 4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius).
  • Product 2: LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results.
  • Product 2: TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning.
  • Product 2: DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral.
  • Product 2: AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets.
Check Stock

Ignition Coil Tester - Qiilu COP Ignition System Quick Tester Coil On Plug Professional Auto Car Ignition Coil System Quick Tester Check Diagnostic Tool

  • ...g the signal from the secondary ignition coil, and the test result is accurate and reliable. Hand‑held Coil On Plug fast ignition tester, battery powered, with stable and professional performance.
  • Complete Set --- Once the signal is received, the tester will determine whether the COP produces the correct amount of voltage and arc duration. Including 1 Ignition Coil Tester, 1 Adapter Lever, 1 Sensor, 1 Manual, 1 Storage Bag.
  • Test Results --- If the voltage is correct, the tester will beep and the red LED indicator will flash.
  • if the arc duration is correct, the green LED will also flash.
  • Easy to Use --- Correctly connect the connector and sensor head to the tester. The induction head is aligned with the ignition coil to start working, and the working status of the ignition coil is judged according to the result of lighting.
Check Stock

USB Digital Power Meter Tester,Tohilkel Safety Tester Multimeter Current and Voltage Monitor DC 5.1A 30V Amp Voltage Power Meter Test Speed of Chargers Cables Capacity of Power Banks-Black

  • MULTIFUNCTIONAL USB TESTER: USB Meter Tester is mainly used to detect USB charging current, voltage, discharge capacity, quantity of electric charge,....
  • SECURITY GUARANTEE: Built-in CW3002D chip, use indoor intelligent system, Supports QC 2.0 / 3.0 high voltage test, too low and too high voltage....
  • WIDE APPLICATION: The handy USB tester can be applied to many electric devices, such as mobile phone, portable power bank, tablets, pad, camera.....
  • WIDE TESTING RANGE & SIMPLE OPERATION：Input/Output Voltage: DC3-30V, Current Range: 0-5.1A. This portable USB tester is easy to carry and enables....
  • Any questions contact [email protected]'ll be solve online at the first time..
Check Stock

Keeptop Non-Contact Voltage Tester - Electrical Tester with Dual Range AC 12 to 1000V, Live/Null Wire and Circuit Tester, Voltage Detector with Flashlight and Pocket Clip

  • Super Large LCD Screen -- Compared with other voltage testers, our screen is 6.6 larger than their testers, and the high resolution screen will show 3 test results, such as the volt, frequency and analog bar.
  • Non-Contact & 8 LED Indicators -- Non contact voltage detection ensures the safety of testing, and 8 LED Indicators in 3 colors display (Green, Yellow, Red) help to distinguish the detected voltage intensity easily.
  • Auto-ranging Digital Multimeter -- Designed for the novice. Plug the test leads only, the multimeter tester can smart to test voltage DC or AC frequency, resistance, as well as continuity.
  • Perfect Helper for Electrical Issues -- SUETTLA X1 Volatge tester arrive CAT II 600V safety level, help to detect the null/live wire, breakpoint locate, AC/DC volts testing, Ohm measure etc, to save the high service fees..
  • Fastest Reading Speed -- With upgraded chips, greatly increase the sensitivity, make the voltage multimeter tester measuring in 0.2s (5 times/s).
Check Stock