Reviews 3 Port Test Valve

BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port

  • BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
  • R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
  • BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
  • 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
  • The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
  • Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
Check Stock

FibroPool 2' POSI- Close 3 Way Non- Lube Valve

  • ++ Fibropool 2" Posi-Close 3 WAY VALVE. it features 2" slip ports. Your 2" pipe will glue inside the port..
  • ++ CPVC construction allows temperature and impact resistance..
  • ++ Serviceable, but does not need grease or lube, PTFE seats are lubeless..
  • ++ Ideal for heater and chemical dispenser/ salt generator installations..
  • ++The valve handle closes any of the 3 ports, or leaves all 3 open. Any port can be partially closed to regulate the flow.
Check Stock

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

FibroPool 1 1/2' POSI- Close 3 Way Non- Lube Valve…

  • ++ Fibropool 1 1/2" Posi-Close 3 WAY VALVE. it features 1 1/2" slip ports. Your 1 1/2" pipe will glue inside the port..
  • ++ CPVC construction allows temperature and impact resistance..
  • ++ Serviceable, but does not need grease or lube, PTFE seats are lubeless..
  • ++ Ideal for heater and chemical dispenser/ salt generator installations..
  • ++The valve handle closes any of the 3 ports, or leaves all 3 open. Any port can be partially closed to regulate the flow.
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

AUTOOL EVAP Vacuum Automotive Smoke Machine Leak Detector Diagnostic Tester

  • ... in 1996 are equipped with EVAP service ports.
  • in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system..
  • 【External Pressure Gauge】You can observe the barometer to more accurately determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car’s pipeline. If the barometer index keeps decreasing, your car’s pipeline leaks need to be repaired, and there is a barometer test. Leakage is faster and more accurate.
  • 【External Flow Meter】You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing....
Check Stock

Manual Pinch Valve, 5/16\ to 3/8\ Tube OD

  • Pinched valve tube size: 5/16" to 3/8" od.
  • Description: innotek pv-3 manual pinch valve, 5/16" to 3/8" tube od.
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

Frienda AC R134A R1234YF Valve Core Tool, 35 Pieces Air Condition Valve Core A/C R12 R134a R1234YF Refrigeration Schrader Valve Core, 3 Pieces Remover Tool with 20 Pieces O-Ring Rubber Seal for Car

  • What you will get: the package comes with automotive AC valve core remover and installer tool set, including 3 pieces valve core remover tool, 10 pieces R134a refrigeration schrader valve cores, 20 pieces R12 refrigeration schrader valve cores, 5 pieces R1234YF refrigeration schrader valve cores, 20 pieces O-ring rubber seals, complete accessories to meet your daily disassembly and assembly needs.
  • Widely applicable: the automotive AC valve core remover and installer tool set is compatible with R134A and R1234YF automotive air conditioning systems, and is compatible with standard, JRA and Schrader valves.
  • Quality valve air conditioning valve core are compatible with R12/ R134A/ R1234YF automotive and household air-conditioning accessories.
  • Please check if the model is what you need.
  • Quality construction: the valve core remover and installer tool kit is made of solid and sturdy metal materials, reliable and durable.
  • The parts are oil-resistant, impact-resistant, corrosion-resistant, water-proof, not easy to chip and break, which support a long time application.
  • Easy to store and use: the valve core remover and installer tool kit comes with a box, which is easy to store, and is simple to operate.
  • The connector without text mark is suitable for the connecto....
Check Stock