LANTRO JS EMI Power Filter Single Phase Filter AC 125or 250V 10A, for Most Digital Devices

  • ◆SPECIFICATION - Rated Voltage: 125/250V.
  • ◆HIGH QUALITY - There is a single bipolar single phase power supply filter with good common mode and differential mode rejection characteristics.
  • ◆APPLICATION - The power filter can suppress continuous and intermittent pulse interference, It is widely used in most digital devices (especially switching power supplies) and white goods with inverter and inverter for control system, such treadmills and other fields.
  • ◆EASY TO USE - The emi filter is universal, compact and easy to install.
Check Stock

Shop Fox W1830 3-Speed Hanging Air Filter, White

  • 1/8 horsepower, 120-Volt, single phase, CSA certified.
  • Easy-to-replace filters, no tools required.
  • Inner filter can be washed or blown out with compressed air.
  • Includes eye bolts and chains for hanging from the ceiling, or can be used on a workbench.
  • Power cord Length: approximately 72 inch.
Check Stock

Extech PQ3350-1-NIST Power Quality Meter with NIST

  • Data logging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings).
  • Flexible clamp probes can be used for wrapping around bus bars and wire bundles.
  • Large backlighting LCD displays up to 35 parameters in one screen.
  • Clamp-on True RMS power measurements with on-screen Harmonics display.
  • Simultaneous display of Harmonics and Waveform.
Check Stock

CERWIN Vega Under Seat Enclosed Powered Plug and Play Subwoofers Series (VRAD10)

  • 10" 4 Ohm Vega Series Subwoofer Built-In Passive Radiator.
  • Power Handling: Peak: 600 watts RMS: 200 watts.
  • Remote Subwoofer Control Included RCA and High-Level Inputs.
  • Subsonic Filter: 35Hz Low Pass Filter: 30Hz - 150Hz.
  • Phase Switch: 0 or 180 degree Bass Boost: 0 to 12 dB.
Check Stock

American Bass PH1600 Subwoofer Amplifier

  • Specifications: 1-Ohm stable. Mono - block hybrid amplifier. Max power @ 1 ohm: 4800 watts. RMS power @ 1 ohm: 2200 watts. Low levelInput & output. Frequency response: 20hz ~ 250hz.
  • Input level: 0.2v ~ 6v. Variable subsonic filter: 10hz ~ 50hz. Variable low pass filter: 35hz ~ 250hz. Varaible bass boost: 0 ~ 9db at 45hz. Variable phase shift: 0 ~ 180 degrees.
  • Remote gain controller. Two amplifiers linkable connector & selector. Fuse ratting: 120a. Linked fuse: 240a. Dimensions: 13.26 length x 6.5 width x 2.25 height.
Check Stock

Garosa Voltage Monitoring Relay, Overvoltage Undervoltage Monitoring Sequence Protector with LED Lights, 480VAC

  • 【Item Main Purpose】This phase sequence protector is mainly used for various fault detection of 3-phase voltage.not easy to be damaged, can be used for a long time without worry..
  • 【5 Indicators To Indicate】Normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage.We fully guarantee the quality of our products.Please rest assured to buy our items..
  • 【Full-Featured】It integrates three-phase voltage display, over-voltage protection, under-voltage protection, phase-gap protection (phase-break protection), three-phase voltage unbalance protection, phase sequence protection (phase-staggered protection) and acoustooptic alarm..
  • 【Installation Method】The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
  • 【Application Scenarios】This phase sequence protector is widely used in air compressor, motor distribution box, pump, central air conditioning units, power distribution cabinet, crane, etc.Safety using. If you still have any questions, please send us emails, we're available 24 hours..
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR, COMPRESSED AIR SYSTEMS, 75 CFM, GOOD FOR 15HP & 20HP COMPRESSORS (STAND ALONE DRYER)

  • NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER 115V, SINGLE PHASE.
  • PLEASE NOTE:: YOU MUST USE A MINIMUM 1 MICRON FILTER / WATER SEPARATOR BEFORE REFRIGERATED AIR DRYERS.
  • ITS VITAL THAT WATER & OIL ARE REMOVED FROM THE PIPING BEFORE HITTING THE DRYER. PLEASE SELECt OPTION " WITH PRE-FILTER" FOR A COMPLETE KIT THAT INCLUDES THE DRYER, PLUS STAGE 1 WATER SEPARATOR FILTER + STAGE 2 COALESCING FILTER FOR OIL. IF YOU NEED FILTER AND AIR PRESSURE REGULATOR, PLEASE SELECT "WITH REGULATOR PRE-FILTER" FROM THE ABOVE LINK..
  • 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / REFRIGERANT FLUID TYPE: R134a / WIRE SIZE REQUIRED: 10 GAUGE / DEW POINT: 41 DEGREES FAHRENHEIT AT 100 PSI.
  • 220 PSI MAX INLET / DIMENSIONS IN INCHES: ( HEIGHT 29.25" ) ( WIDTH 13.9" ) (LENGTH/DEPTH 16.9") / 75 LBS.
Check Stock

ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control

  • ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
  • Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

Omron K8DS-PH1 Phase Monitoring Relay

  • The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
  • Use 5 indicators to indicate: normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage..
  • Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S..
  • Overvoltage protection means that the voltage of the protected line is higher than the set value, and the delay is 3~8S, and the recovery is 6~20VAC..
  • Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action..
Check Stock