Reviews 3 Inch Receiver Ball Mounts

Shocker Air Hitch w/ Drop Ball Mount 4-1/2 to 8-1/2 Drop Fits 2 Hitch Has 2-5/16 Ball 12000 lbs

  • Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Fine tune for your towing weight. Just add air for heavier loads.....
  • Adjustable height for drop ball mount ( 4-1/2 inches to 8-1/2 inches of drop) - Choose either 2" or 2-5/16" hitch ball (Note a 2" ball has 10,000lbs....
  • 12,000 lbs towing capacity & 1,200 lbs tongue weight. - Choose for 2" receiver hitch or 2-1/2" receiver hitch. For this product, our 2" hitch will not....
  • Works great on compact, midsize and full size pickup trucks, vans and select SUV's with the receiver hitch under the bumper. Built in airbag cushions....
  • Huge selection of Shocker ball mount attachment adapters available from Pintle, combo ball, draw bar, raise ball mounts and more. Made in the USA by....
Check Stock

CURT 45982 Rebellion XD Adjustable Cushion Hitch with Dual Ball, 2-Inch Receiver, 2, 2-5/16-In Balls, 15,000 lbs, 6-in Drop

  • INCREASED COMFORT. This cushion hitch ball mount is engineered with ShockDrop technology, featuring a cushioned isolator that helps deter jerking, jarring, bumps, vibrations, rattling and noise for a more comfortable ride while towing.
  • IMPROVED CONTROL. The dynamic, adaptive isolator of this cushion ball mount helps improve driver control by reducing the tendency for trailer sway and managing sudden braking. It does this without any need for an anti-rattle hitch or anti-rattle shim.
  • VIRTUALLY NO MAINTENANCE. Unlike other torsion hitch and cushion hitch ball mounts, the Rebellion XD does not have an airbag or bearings. This makes the unit very easy to use, lightweight and virtually maintenance-free.
  • HIGH-STRENGTH. For dependable towing strength, the Rebellion XD shock-absorbing hitch is constructed from cast steel . The 2-inch ball is rated for 10,000 pounds, and the 2-5/16-inch for 15,000 (limited to lowest-rated towing component).
  • EASILY ADJUSTABLE. This cushion hitch ball mount is equipped with a 2-inch shank to fit a standard 2-inch hitch receiver. The dual ball can be adjusted up or down for level towing (6-inch max drop, no rise).
Check Stock

CURT 45955 Rebellion XD Adjustable Cushion Hitch with Dual Ball 2-1/2-Inch Receiver 2 2-5/16-In Balls 20,000 lbs 8-in Drop

  • INCREASED COMFORT. This cushion hitch ball mount is engineered with ShockDrop technology, featuring a cushioned isolator that helps deter jerking, jarring, bumps, vibrations, rattling and noise for a more comfortable ride while towing.
  • IMPROVED CONTROL. The dynamic, adaptive isolator of this cushion ball mount helps improve driver control by reducing jerking and jarring and managing sudden braking. It does this without any need for an anti-rattle hitch or anti-rattle shim.
  • VIRTUALLY NO MAINTENANCE. Unlike other torsion hitch and cushion hitch ball mounts, the Rebellion XD does not have an airbag or bearings. This makes the unit very easy to use and virtually maintenance-free.
  • HIGH-STRENGTH. For dependable towing strength, the Rebellion XD shock-absorbing hitch is constructed from cast steel and fully tested for 20,000 lbs. gross trailer weight for the 2-5/16-inch ball and 10,000 lbs for the 2-inch ball (limited to lowest-rated towing component).
  • EASILY ADJUSTABLE. This cushion hitch ball mount is equipped with a 2-1/2-inch shank to fit a standard 2-1/2-inch hitch receiver. The dual trailer ball can be dropped down for level towing (8-inch max drop.
Check Stock

1ml 25G 1inch Disposable Luer Lock Syringa with Needla Individually Packaged 20Pack

  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 2,000 pounds gross trailer weight and 200....
  • VERSATILE USE. This trailer hitch ball mount comes with a 1-1/4-inch x 1-1/4-inch shank to fit virtually any industry-standard 1-1/4-inch receiver.....
  • READY TO TOW. Hitching up your trailer is easy with this 1-1/4 ball mount. It features a 3/4-inch hole to accept a trailer hitch ball with a 3/4-inch....
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain,....
  • EASY TO INSTALL. To install this class 1 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 1-1/4-inch hitch receiver. The....
Check Stock

CURT 45431 Industrial Duty Forged Trailer Hitch Ball Mount Fits 3-Inch Receiver 21,000 lbs 1-1/4-Inch Hole 6-Inch Drop 4-Inch Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 21,000 pounds gross trailer weight and 2,800 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 3-inch x 3-inch shank to fit any industry-standard 3-inch receiver. The ball mount also has a 6-inch drop and 4-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 3-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this hitch ball mount on your truck, simply insert the shank into your vehicle's 3-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

bROK Products 15964 2\ x3/4\ x1-1/2 Chrome Hitch Ball - 3500 lb.

  • Enables one wrench to tighten on bROK and hex recess ball mounts.
  • Oversized platform base for improved support over traditional hitch balls.
  • Backwards and forward integration with bROK, hex, standard and heavy-duty forged ball mounts.
  • 2 inch diameter, 3/4 inch shank diameter, 1-1/2 inch shank length.
Check Stock

CURT 45520 Class 2 Trailer Hitch Ball Mount, Fits 1-1/4-Inch Receiver, 3,500 lbs, 3/4-Inch Hole, 3-1/8-Inch Rise

  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 3,500 pounds gross trailer weight and 350 pounds tongue weight (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 1-1/4-inch x 1-1/4-inch shank to fit virtually any industry-standard 1-1/4-inch receiver. The ball mount also has a 3-1/8-inch rise to promote level towing.
  • READY TO TOW. Hitching up your trailer is easy with this 1-1/4 ball mount. It features a 3/4-inch hole to accept a trailer hitch ball with a 3/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 2 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 1-1/4-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45792 Dual Receiver Trailer Hitch Ball Mount 2-Inch 3,500 lbs

  • HIGHLY VERSATILE. This multi-use trailer hitch ball mount equips your vehicle with two 2-inch hitch receivers, one for towing a trailer and the other....
  • DEPENDABLE STRENGTH. This ball hitch is constructed from strong steel and the bottom receiver is rated to tow up to 3,500 pounds GTW and 350 pounds TW....
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It has a 2-inch x 2-inch shank to fit virtually any industry-standard....
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable powder coat finish, easily resisting damage from rain, dirt,....
  • EASY TO INSTALL. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The....
Check Stock

CURT 45503 Class 2 Trailer Hitch Ball Mount, Fits 1-1/4-Inch Receiver, 3,500 lbs, 3/4-Inch Hole, 1-Inch Drop, 3/8-Inch Rise

  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 3,500 pounds gross trailer weight and 350 pounds tongue weight (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 1-1/4-inch x 1-1/4-inch shank to fit virtually any industry-standard 1-1/4-inch receiver. The ball mount also has a 1-inch drop and 3/8-inch rise to promote level towing.
  • READY TO TOW. Hitching up your trailer is easy with this 1-1/4 ball mount. It features a 3/4-inch hole to accept a trailer hitch ball with a 3/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 2 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 1-1/4-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock