Reviews 3 In 1 Wrench Tool

Rugged Tools Wrench Roll Up Pouch - Wrench Organizer & Tool Holder With SAE & Metric Labels

  • 24 Wrench Slots: There are 24 pockets of graduated widths from 5 cm - 2.8 cm pockets to organize your entire metric and SAE wrench set.
  • POCKET Labels: Tool Roll Up Bag includes stickers with pre-printed SAE sizes 1/4 to 1" in red and metric sizes 6 to 19mm in blue + 8 blank labels..
  • 4 Utility Pockets: Each of the four pockets of this wrench holder are 45 cm wide to accommodate hex key sets, bits, sockets, etc..
  • 3 Metal Grommets: Use to hang wrench pouch on peg boards in your workshop or jobsite. The security flap on the roll up tool bag holds your tools in....
  • HEAVY DUTY CONSTRUCTION KEEPS YOUR TOOLS SECURE - Tool Roll Up Pouch is constructed of 600D polyester with grease resistant PVC lining and quick-open....
Check Stock

2Pcs Universal 12 Inch Oil Filter Pliers 2-1/2 to 4-1/2 Inch and Adjustable 3 Jaw Oil Filter Wrench 2-1/8 to 4-1/2 Oil Filter Change Removal Tool Set

  • Package Include - The oil filter wrench set includes a 12 inch long handle grip pliers, and an adjustable 3 jaw 2 way oil filter wrench removal tool for install oil filters and remove..
  • Oil Filter Plier - The long handles plier has a 12 inch long handle, the max jaw open is about 2-1/2 to 4-1/2 inch(63.5 to 115mm), with right angle teeth for grip and a 3-position slip joint design for quickly adjusts to size. Good for almost all of your family vehicles..
  • 3-Jaw 2-Way Oil Filter Wrench - This adjustable oil filter removal tool manufactured from durable carbon steel and is made specifically to be used to remove oil filters ranging from 2-1/8 inch to 4-1/2 inch (54-116mm).
  • The wrench Set are made of hardened steel, high hardness and strength. After drop forged, heat treated steel with rust-resistant finish, durable enough for long time service..
  • Universal Tool - This oil filter wrench remover tool set would help you do the job easily. Recommended for most common size car and stuck engine oil filters. As long as the filter is not too small, it will remove most filters..
Check Stock

Mudder 6 Pieces Bike Spoke Wrench Tool Bicycle Spoke Tool Steel Bike Rim Correct Kit Cycling Pocket Tools for Bike Repair

  • Function: these bicycle spoke wrenches are the useful tool for bicycle wheel correction, which can effectively adjust the tightness of the steel wire and correct the deformation of the wheel.
  • Quality material: the bicycle spoke wrench is made of hard steel, blue model spoke wrench and double-headed bike spoke wrench are made of hard metal with plastic cover, which are durable, resistant to corrosion and oxidation, and have a long service life, small and lightweight, can be carried around, placed in the front basket of the bicycle, ready to use, and to prevent loss.
  • Feature: spoke nipples including sizes 10G (5 mm), 11G (4.4 mm), 12G (3.96 mm), 13G (3.45 mm), 14G (3.35 mm), 15G (3.23 mm), these round bicycle spoke wrenches are suitable for adjusting spokes on all kinds of push bike wheel and varied sizes works with different spoke sizes.
  • What you can get: comes with 2 pieces bicycle spoke wrench 8 cut open, measures 1.57 x 1.57 x 0.47 inch, 2 pieces 14G blue model spoke wrench, size is 2 x 1.45 x 0.54 inch, 2 pieces 14-15G black double-headed bike spoke wrench, size is 4.9 x 0.52 inch/ 125 x 13 mm, various sizes to meet your different needs, make your life convenient.
  • Widely use: this bike wrench tool kit fit for both road bike and mountain bike wheel, he....
Check Stock

VCT 4pc SAE Ratcheting Double End Half Moon Reversible Wrench Set 3/8' - 7/8'

  • Fix your engine or finish your home improvement projects with the 4pc Double Ended Ratcheting Half Moon Wrench Set. Half Moon Ratchet box end wrench set features sizes 3/8", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8" in a curved, half-moon shape..
  • Work around corners or other obstacles easily with the half moon curved shape. Normal combination wrenches need 30 degrees to move a fastener but this box ratchet wrench set only needs as little as 5 degrees. 12-point head allows a secure grip on fasteners to protect your project and yourself. Ratchet wrench SAE sized tools have a small lever to allow you to switch ratcheting direction with a finger to avoid slippage and to readjust the multi size ratcheting wrench..
  • Get around obstacles with the half-moon 4pc SAE Ratcheting Wrench Set.
  • 12-point double end wrenches heads encase fasteners with hex, jam, cap, and square heads Box end wrench set includes a 3/8" and 7/16", 1/2" and 9/16", 5/8" and 11/16", 3/4" and 7/8", wrenches Small lever on ratchet box wrench set allows you to switch between tightening and loosening with a finger without letting go of tool set wrenches.
  • Get into hard-to-reach areas with SAE half moon box end wrenches Half-moon shape allows you to maneuver around poles and pipes so your access is not....
Check Stock

KIMO Cordless Impact Wrench 1/2 Inch, Impact Wrench Kit w/Premium Brake Stop, 7 Sockets, 1-Hour Fast Charger, 1/2 Impact Gun, Brushless High Torque Impact Driver with 260 ft-lbs (350N.m) & 3000 RPM

  • Top Rated 21-Volt Cordless Brushless Impact Wrench.
  • Powerful Brushless Impact Wrench with 3,132 in-lbs Torque: This electric impact wrench uses a brushless motor. The max tightening torque is 3,132 in-lbs and max losening torque is 3,940in-lbs. Rusty or over-tightened nuts and bolts can be easily removal. Max no load speed is 2200 rpm and 3800 bpm impact rate for driving large fasteners and tough sockets. You can change the speed of the impact power wrench cordless with the pressure you apply to the trigger..
  • Upgrade Capable for Impact Driver: The impact screwdriver can extend the running time by 48%. Fast charging in 1 hour is 15% faster than the same hammer drill and it can be fully charged in 1-2 hours. The smart chip can provide discharge, overcharge, over temperature and over protection..
  • Impact Wrench Kit with Most Performance: The compact cordless impact wrench is designed with unique friction design instead of bearing ball,1/2 square drives chuck is more motivated in tough work.Unique smart chip technology will automatically shuts the tool down when it loose nub to prevent drop..
  • Power Electric Impact Wrench Applicable to Multi-Scene: 1/2 impact wrench is not only suitable for removing tires and lug from motorcycles, but also can be used for....
Check Stock

Multi purpose survival Pocket tool - 43 in 1 - credit card wallet size Ninja Multitool (Black)

  • – TSA Compliant | Widget Credit Card multitool Fits in most wallets | Weighs merely 1 once | Virtually unbreakable!.
  • 43 Functions: 3x Screw Drivers ( Phillip &.
  • Flatehead), Box Cutter/ Blade, Bottle Opener, 2x Ruler (cm/in), Can Opener, Cell Phone Mount, Nail Puller, Eye Glasses Screw Driver, M2 Hex Wrench, 4x Open Hex Wrench (M3,M4,M5,M6), 4x Closed Hex Wrench (7/16, 3/8, 11/32, 5/16), M1.6 Hex Wrench, Butterfly Wrench, 4x Spoke Keys (.127, .130, .136, .156), 9/16″ Hex Wrench, Protractor, 15mm Hex Wrench, M2.5 Hex Wrench, 8x Dividers (D1cm-12cm), Key Ring hole, *Money clip (*Money Clip version only) and more.
Check Stock

LASIEYO Adjustable Wrench, 10\ to 12\ Crescent Wrenches with 180° Rotating Head Ratcheting Wrench tool, Cr-V Chrome Vanadium Steel

  • 【3 in 1 Wrench Size】Unique handle adopts a retractable design, which can be easily transformed into a 10-inch, 11-inch and 12-inch wrench, providing you with more options..
  • 【180° Head Adjustable】Allows the head to rotate up to 180° to access hard-to-reach fasteners..
  • 【Dual Purpose Wrench Tool】Ratchet design to tighten the screws more labor-saving. Ratcheting On/Off switch allows the wrench to be used as a ratchet wrench also be a traditional wrench..
  • 【Premium Quality】Forged Cr-V chrome vanadium steel is strong and durable.This wrench tool can be used in auto repair, home repair, construction and other industries, and it is also popular among DIY design enthusiasts..
  • 【Wide Application for Repair】 Adjustable wrench fits Approx 1.77"/45mm Jaw opening with precision machined Jaws and knurled adjustment worm, accepts a wide range of fastener sizes, perfect for home appliance maintenance and repair..
Check Stock

XINMEIWEN 7Pcs Bike Spoke Wrench Bike Spoke Tool Kit Includes 8 Way Bike Rim Truing Tool Spoke Key with Rubber Handle Tire Lever Y-Type Hex Wrench Y-Type Socket Wrench

  • ★Package includes →This bike spoke tool kit includes 2 8-cut bicycle spoke wrenches + 2 bicycle spoke wrenches with rubber handles + 1 tire lever + 1 Y-shaped hex wrench + Y-shaped sleeve a barrel wrench..
  • ★Durable and reliable →The bike spoke wrench is made of metal material, sturdy and durable and not easy to break or deform. And the handle of the wrench is attached with plastic, so it will not slip off easily during use..
  • ★8 cut-off bike spoke wrench →The round spoke wrench tool is made of high-quality stainless steel, which is wear-resistant and can be used for a long time. Used to adjust the tightness of bicycle spokes and spoke joints, suitable for sizes such as 10G (5mm), 11G (4.4mm), 12G (3.96mm), 13G (3.45mm), 14G (3.35mm), 15G (3.23mm), etc..
  • ★Practical tools →Metal steel tire lever is perfect for toolboxes and workshops to repair flat bicycle tires. The multifunctional spoke wrench is very suitable for removing or installing valve cores..
  • ★Essential tools →This spoke wrench kit is an essential tool for you to correct bicycle rims when tightening, removing and installing bicycle spokes. Suitable for road bike and mountain bike wheels..
Check Stock

OTC 4568 2-1/2 to 5-1/4 3-Prong Self-Adjusting Oil Filter Remover

  • OTC's 3-prong self-adjusting oil filter wrench features 3 arms that adjust to fit a wide range of filter sizes, making this a very flexible tool for....
  • Knurled legs provide extra gripping power.
  • rotation of the tool adjusts the the legs tightly against the filter.
  • Fits filters ranging from 2-1/2 inches to 5-1/4 inches (65 mm to 135 mm) in diameter.
  • To turn the tool use a 1/2 inch drive ratchet in the ratchet drive or a 13/16 inch wrench or socket on the nut.
Check Stock