Reviews 3 Exhaust Band Clamp

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • ...5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

  • 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
  • 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • ...ade of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

Roadformer 5" Butt Joint Exhaust Clamp - Aluminized Steel for 5 inch OD exhaust pipes, muffler ends and exhaust system connection with leakage free (2 Pack)

  • 2 PIECES IN PACKAGE – 5 inch butt joint exhaust clamp is made in high quality Aluminized Steel, it is used for 5 inch OD pipes & muffler ends connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, New design provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 560 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

Pack of 2 Butt Joint Narrow Band Exhaust Seal Clamp Muffler Clamp Band Stainless Steel Connection for Cars (2IN)

  • The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket car systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • The butt strap clamp is a simple and effective way to connect car system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Maximum Diameter: 2", Band Width: 1 1/4" (1.25").
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch

  • Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch,2Pcs

  • Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock

ESPEEDER 3.0 Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 3.0" OD Pipe to 3.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs.....
  • The lap joint clamps 3.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat....
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without....
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" lap joint band clamp, you can feel free to contact us via....
Check Stock