Reviews 3 8 Cap Nuts

Southwest Wheel R30484X 84 Spindle & 5-5\ Bolt Circle Trailer Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

ECUDIS 4 Cross-Shaped Universal Light Fixture Crossbar Lighting Crossbar with Screws and Nuts

  • 4" Off Swiv Offset light crossbar, 3 13/16" in length with screws and nuts..
  • Use to mount lighting fixtures to wall or ceiling, match black and silver lamp..
  • Easy to install the crossbar on the electric box, please follow your local electrical codes and regulations..
  • Adjustable hardware iron light hardware tools for lighting fixture installation, you can use it for fixtures or canopies to electrical junction boxes.
  • Package includes: 1 x crossbar, 2 x 1.5" screws, 2 x 1" long screws, and 2 x black acorn cap nuts, 2 x silver acorn cap nuts..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

OZCO 51768 Ironwood 4-inch Flush Inside 45-degree Angle Bracket, (4 per Pack), Black

  • Kit Includes: 4 Flush Inside 45-degree Plates.
  • Includes: 24 OWT-Lock #12 by 1-1/4-inch Hex HD Sharp Point (1/4-inch Hex).
  • Material constructed of pre-galvanized steel with a black powder coated finish.
  • Approved for use with ACQ Treated Lumber​.
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

  • Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub.
  • 5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

Heavy Duty Leveler Legs w/Lock Nuts - Leveling Feet for Furniture, Cabinets, & Workbench - 4 Pack

  • HEAVY DUTY - Made from 14 ga. (.080") steel. Load capacity is 2,000 lbs. per leg.
  • INTEGRAL LEDGER - Ensures that the load is carried by the leveler, not the screws.
  • LOCK NUTS INCLUDED - An absolute MUST for the workshop or garage, especially if any vibrating machinery is involved..
  • FREE SPINNING FOOT - Compensates for irregular floors. Polyethylene cap protects floors as it keeps moisture away.
  • YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrenchDescriptionGot a 8,000 lb. workbench that needs leveling?... Read On!.
  • D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust..
  • Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs..
  • The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as y....
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock