Kidd Scope Base for a 10/22 or Ruger 10/22-black Low
- low scope base height is 5/16" (about 1/4") by 5 7/8" long.
- Picatinny spacing system similar to the military spec.
- extends over the barrel 1 1/4" for increased eye relief.
Check StockKidd Scope Base for a 10/22 or Ruger 10/22-Silver Low
- Low scope base height is 5/16" (about "1/4") by 5 7/8" long.
- extends over the barrel 1 1/4" for increased eye relief.
Check StockFeyachi V30 2MOA Red Dot Sight Auto On & Off 1x20mm Compact Reddot Optics with Low Profile and Absolute Co-Witness Mount Flip Up Lens Covers and Anti Reflection Device
- Featuring a multi-coated lenses which provide a clean, bright and unobscured point of view. Crisp 2MOA Red Dot for precision aiming both-eyes-open....
- Digital push-button brightness and power controls. 10 brightness settings. Memorized function which means it remembers last used brightness settings....
- Equipped with auto power awake / off feature. Powers up when it senses motion and auto off when it senses not motion in 1 hour. Gives thousands of....
- Provides 2 base mounting options - Low Profile and Absolute Co-witness. Turret caps feature a built-in adjustment tool for Elevation/Windage....
- Durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. Certified up to 800G’s recoil impact. Come with flip....
Check StockBKL 1in. Dia x 3in. Long Cantilever with 1-5/8in. Clamping Length, Black (BKL-253-MB)
- ❖Heavy Duty:4 screw design with cut for weight reduction,weaver base mount with 2 top Slots Medium profile..
- ❖Fit to All 20mm Rail:Tactical mount ring Medium profile with spirit level,1‘’/24.5mm diameter fit most scope and tactical flashlight..
- ❖SeeThrough Design:See through design allow you to aim with the rifle's iron sight even with a scope installed..
- ❖Exquisite Workmanship:Precision machined from aircraft-grade aluminum alloy with anodized black matte finish..
- ❖Easy to Install:With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock
Air Venturi 4x15 Air Rifle Scope and Lasso Mount, BB Gun Scope Attachment
- AIR GUN SCOPE: The 4x15 Air Rifle Scope and LASSO Mount is a perfect scope attachment that helps any air gun user have better range and optics on their air rifles. Use this scope to instruct beginners, or buy it for a veteran air rifle master..
- AIR GUN COMPATIBILITY: This high-powered Air Rifle Scope and LASSO Mount is compatible with Red Ryder, Lil Duke, and Lil Sure Shot air rifles. The scope mount attachment gives you better control and precision and more powerful shots..
- HIGH-QUALITY MATERIALS: The 3/8-inch dovetail mount has an aluminum construction and weighs 0.37 lbs, making this a lightweight rifle scope that's easy to carry around. The included adjustable scope rings help you find the right fit on your air rifle..
- INSTALLATION: Remove the elevation ramp from the rear sight and use a screwdriver to remove the rear stock screw. Slide the mount base forward into the top of the air gun and replace the rear stock screw. Attach the air gun scope on top of the mount..
- AIR VENTURI: Since 2010, we've been an innovator in the airsoft guns and accessories industry. Our quality airsoft equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check StockMonstrum One Piece Scope Mount for Marlin 336/1894/1895 Series Lever Action Rifles | Low Profile | 1 Inch Diameter
- Dedicated scope mounting platform built specifically for Marlin 336/1894/1895 Series lever action rifles.
- Rings are 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
- Scope mount base installs directly to the Marlin factory mounting holes via the included set screws with no additional mounting hardware required.
- Note that the low profile design may not accommodate scopes with large objective bells and that installation may require removal of your rear sight. Please measure scope mount dimensions against your scope before purchasing..
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check StockSVBONY Universal Dovetail Base, Finderscope Mount Bracket, for Installation of Finder Scope for Optical Telescope
- Compatible for Clestron Orion Sky-watcher Vixen and so on.
- For adding a second or third aiming device to your telescope.
- optimal optical telescope finder scope accessories.
- with enhance performance under the stars.
- Finder scope dovetail slots ideal for custom installation of any finder scope.
- Dovetail base work with finder scope or reflex sight bracket.
- so you can securely attach an aiming device to any telescope.
- made of high strength aluminum with anodizing aluminium process.
Check Stock
ToopMount Picatinny Rail Mount Adapter Tactical 20mm Weaver Scope Base Rail 12 Slots Scope Mount Aluminum Picatinny Rail Set for Outdoor Sport
- Large Self-locking Thumb Knobs Nut: A unique self-locking thumbnut that fits snugly in the Picatinny for continuous zero holds..
- 5.19" Long with 6 Slots: Allows enough space for mounting of different sized optics and provides flexible eye relief adjustment..
- Material & Size: Picatinnys rail mount adapter made of high strength Aluminum Alloy. Length: 132mm (5.19inch). Width: 21mm (0.83inch). Height: 33mm(1.3inch).Item Weight: 60g, Lightweight and Portable design..
- Using: Drop-In and tighten the installation. 20mm Standard Weaver Base take any scope mounts. 6 slots tactical 20mm weaver scope base use for outdoor sport..
- Buy with Confidence: Package includes 1x Picatinny Rail Set, 2x Screws, Full Metal Scope Mount Base With QD Nut. Welcome to contact us if you have any questions or concerns, our customer staff will help you to solve the problem as soon as possible..
Check StockLow Profile Scope Rings 1 inch – Rifle Scope Rings Scope Mounting Rings 1 Inch for Picatinny and Weaver Rails(2 Pieces)
- The double tactical low profile scope mount fit for 1 inch / 25.4mm scope tube on the picatinny/weaver rails..
- The height from the center of the riflescope tube to the picatinny base is 0.74 inches (18.7 mm)..
- With mountings screws on the base and four screws on each side of the two scope rings. It will hold the riflescope mount securely..
- Precision machined from aluminum alloy with anodized black matte finish. Light weight, only 2.46oz/70g..
- Easy to install. Note: the rings have a star nut for installation rather than a hex nut and the tool is included..
Check Stock 
