Reviews 2ford F15spindle

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

aohua Center Console Dashboard Vinyl Wrap Cover Gloss Carbon Fiber Interior Pre-Cut Armrest Console Panel Protective Decoration Sticker Accessories for BMW X5 F15 X6 F16 2014 2015 2016 2017 2018

  • Complete wraps kit accessories custom cut to fit all BMW X5 F15 X6 F16 2014-2018. This pre-Cut vinyl film wrap kits has been custom designed to be easily applied over your stock center console,cup holder,dashboard,door handle,door sill scuff guard etc..
  • Upgrade the center console and dashboard: Keep scratches, smudges, fingerprints and dust off your BMW X5 F15 X6 F16 2014-2018 with the simple way. Made of durable vinyl in gloss black, this wrap can protect your center console, also seamlessly blends into your BMW X5 X6 interior with a premium finish..
  • Material: Durable PVC materialhigh-strength & high stability: RESISTANT from wrinkle, wear, water, corrosion, high and low temperature.No bubbling and curling after installation..
  • Carbon Fiber Pattern: Exquisite textured 5D gloss carbon fiber pattern,gloss black smooth surface.Special carbon fiber sticker decoration parts that keep your vehicle unique and eye-catching, instant upgrade the appearance.Freshen up the interior of your car with this car sticker accessories..
  • Easy Installation: No damage installation,No curling problem, you can peel it off and reapply if necessary,traceless backing adhesivesticky enough(highly recommend to use heated gun during the installation) but leaving no residue when peeled....
Check Stock

CCIYU Mower Spindle Spindle Assembly fit for MTD for CUB CADET for TROY-BILT: 618-06977, 618-06977A, 918-06977, 918-06977A; for OREGON: 82-105; for STENS: 285-700

  • COMPATIBLE MODELS:The Spindle Assemblies fit for CUB CADET: XT1-LT46, XT1-LT46 EFI FAB, XT1-LT46 FAB, XT1-LT46 KH, XT1-LT46 KH Carb, XT2-LX46, XT2-LX46 EFI, XT2-LX46 EFI FAB, XT2-LX46 FAB, XT2-LX46 KH, XT2-LX46 KH FAB, XT2-LX46 KW, XT2-LX46 LE FAB.
  • for MTD: 247.20442 T8200, 247.27039 T8600, 247.27042, 247.270421 T8200, 247.27049 T8200, 247.270491 T8200, 247.27333 T3100, 247.27391 T2800.
  • for TROY-BILT: LT FAB46, Super Bronco 46 Hydro, Super Bronco 46 XP, TB 2246 Hydro, TB2246.
  • THE IMPORTANCE OF LAWN MOWER SPINDLE: Spindle Assemblies are crucial parts for your lawn mower cutting deck that work together with the pulleys and belts to perform clean and even mowing. The blades of your mower rotate around the spindles and if the spindles are bent or broken or if the bearings get worn down, your mower won’t operate as it should. Fortunately, you can replace the spindles or the spindle bearings yourself to fix your mower..
  • HOW TO STOP THE SPINDLE FROM MOVING WHEN TAKING LAWN MOWER BLADES OFF: Loosen the clamp on a blade removal tool by turning the handle counterclockwise. Place the removal tool over the end of the blade and the stopping edge over the side of the deck. Turn the handle clockwise to tighten it in place and prevent the spindle from turning..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

  • Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub.
  • 5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKSQ-220044) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings

  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub..
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs..
Check Stock