Reviews 25mhz Dso

DEVMO 24MHz 8CH 24MHz 8 Channel USB Logic Analyzer Device with EMI Ferrite Ring USB Cable UART IIC SPI Debug Compatible with Ar-duino ARM FPGA M100 SCM

  • ★The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • ★Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz..
  • ★Input Impedance: 1Mohm || 10pF (typical, approximate).
  • ★UART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
Check Stock

Mirkit x Baofeng Radio UV-5R MK3X 5 Watt FCC Approved 2022 2100 mAh Li-ion Battery, Tri-Band Radio Mirkit Edition and Neck Strap Lanyard Mirkit Ham Radio Operator

  • ...Audio Gain Settings, In depth user's guide, Auto Power Off Function, Channel Mode Editing Settings, Auto Scan, Scanning Resume, and Variable Frequency Scanning, Quad Watch Delay Time, Randomization Privacy Mode, Builds upon previous generation UV-2501+220.
  • Frequency Range: 144-148MHz (VHF), 222-225MHz (1.25M), 420-450MHz (UHF).
  • Broad (Wide) / Narrowband (Narrow) Selectable.
  • Recommended Accessories: Pair UV-25X4 with the Nagoya TB-320A Antenna (and RB-50 Magnetic Mount) for easy installation. The PC04 FTDI Cable is recommended for easy computer programming.
  • Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm highpass filters are switched with PIN diodes - resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously. A relay that completely isolated the 220 MHz RF filter won't impact the RF performance of the 2 meter/70 cm bands. If monitoring multiple 220MHz or VHF/UHF simultaneously the relay is not heard or used..
  • Tribander Mobile Radio Kit Includes: BTECH UV-25X4, Speaker Mic, 6 foot DC Cable with Cigarette Plug Connector, Radio & Mic Brackets, Mounting Hardware, and User Guide.
Check Stock

2pcs USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 SCM

  • ✹✹The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions..
  • ✹✹Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • ✹✹Input voltage range: -0.5V to 5.25V.
  • ✹✹ART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
  • ✹✹his item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView..
Check Stock

Aoicrie USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug Professional Microcontroller Debug USB Powered FPGA for ARM FPGA M100 SCM

  • This item is an logic analyzer designed to be compatible with Logic Analyzer software, The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input High Voltage: 2.0V to 5.25V, Input Impedance: 1Mohm || 10pF (typical, approximate).
  • A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high, Works with 5V, 3.3V, 2.5V, 2.0V systems. May work with 1.8V but not recommended.Error/Accuracy: pulse-width measurement: +/- 42ns (at 24MHz)..
  • UART, SPI, IIC and other communication debugging, 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols.Suitable for single chip development,ARM system development,FPGA development..
Check Stock

TYT TH-350 Tri-Band Radio 2 Meter, 1.25 Meter (220MHz), 70cm (440 MHz) Analog Radio with Tri-Band Antenna Ship from US only

  • To fully utilize all the features you have to use Windows PC to program this radio. Not Compatible with CHIRP and RT systems software..
  • TYT TH-350 Tri-Band 2 Meter, 1.25 Meter (220 MHz) and 70 cm (440 MHz) Two Way Radio.
  • Special Features: (1) 2 Meter, 1.25 Meter (220 MHz) and 70 cm (440 MHz) (2) Tri – Display (3) Tri – Standby (4) Standby 3 frequencies on the same band or different band at the same time! (5) Will NOT Receive Simultaneously.
  • Other Features 128 Channel Wide/Narrow bandwidth (25kHz/12.5 kHz) VOX CYCSS/DCS Emergency alarming Scrambler DTMF Scan Battery saving function Low battery.
  • Package includes: 1 x TYT TH-350 Tri-Band Analog 1 x USB Programming Cable and software CD. 1 x Shengda Tri-Band 144/220/430 MHz 13 inch. 2 x TYT Antennas* (1 x 144/430 MHz 1 x 220 MHz) 1 x Li-ion Battery 1600mAh 1 x Belt Clip 1 x Charger 1 x Adapter (Input:110-250V 50Hz) 1 x User’s Manual.
Check Stock

BTECH Mini UV-25X2 25 Watt Dual Band Base, Mobile Radio: VHF, UHF Two Way Radio

  • What Makes the UV-25X2 Unique: Dual Synchronize Display Mode, Mic Audio Gain Settings, In depth user's guide, Auto Power Off Function, Channel Mode Editing Settings, Auto Scan, Scanning Resume, and Variable Frequency Scanning, Quad Watch Delay Time, Randomization Privacy Mode, Builds upon previous generation UV-2501.
  • Frequency Range: VHF: 144-148 MHz(Rx/Tx). UHF: 420-450 MHz(Rx/Tx).
  • Broad (Wide) / Narrowband (Narrow) Selectable.
  • Recommended Accessories: Pair UV-25X2 with the Nagoya UT-72 Magnetic Mount Antenna for easy installation. The PC04 FTDI Cable is recommended for easy computer programming.
  • Quad Watch Receiver: The UV-25X2 operates as multiple radios in one, with either 144 MHz or 430 MHz as the "Main" TX/RX band, while simultaneously watching up to 3 other frequencies or channels.
  • and, if you like, you can configure your UV-25X2 for simultaneous VHF-VHF or UHF-UHF operation, too!.
  • Kit Includes: BTECH UV-25X2, Speaker Mic, 6 foot DC Cable with Cigarette Plug Connector, Radio & Mic Brackets, Mounting Hardware, and User Guide.
Check Stock

Replacement 4G Module Card for Dell DW5811e for QualcommEM7455 4G WWAN Card LTE NGFF Card Module Wireless

  • LTE Support (North America / EMEA) -B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz AWS), B7 (800 MHz-DD), B7 (800 MHz-B), B7 (2600 MHz), B8....
  • B25 (1900 MHz), B26 (850 MHz), B29 (700 MHz-D block), B30 (2300 MHz), B41..
  • HSPA + Support Band (Global) -B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz AWS), B5 (850 MHz), B8 (900 MHz)..
  • Best replacement for your cracked / damaged / faulted Module Card..
  • Installation instruction is not included and professional installation is recommended..
Check Stock

Dorhea DSO 150 Digital Oscilloscope Kit with Protection Box Color 2.4″ TFT LCD Full Assembled with Allicator Chip Cable Probe and Case Cover, Sensitivity for Oscilloscope DIY Kit

  • DSO 150 kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″””” color TFT LCD (320×240) display and optical encoder for navigation..
  • Auto/normal/single trigger modes, easy to capture the moment waveform. use 9V DC power charger (NOT Included)..
  • Convenient to capture the instantaneous waveform. 2.4-inch color TFT display, waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value. with secondary development on the basis, can be changed to voltmeter, data loggers..
  • Used for secondary development on the basis of this kit, it can be changed to millivoltmeter, data loggers with instructions, easy to install and operate..
  • waveform storage function: waveform will not lose when save/tune out the waveform/shutdown waveform, available rising or falling edge trigger, observable previous waveform before trigger (negative delay), can freeze waveform display at any time (HOLD function)..
Check Stock

4G Module Replacement Qualcomm 4G LTE WWAN NGFF Card Module Wireless EM7455 for Dell DW5811e

  • LTE Support (North America/EMEA) -B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz AWS), B7 (800 MHz-DD), B7 (800 MHz-B), B7 (2600 MHz), B8....
  • B25 (1900 MHz), B26 (850 MHz), B29 (700 MHz-D block), B30 (2300 MHz), B41..
  • HSPA + Support Band (Global) -B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz AWS), B5 (850 MHz), B8 (900 MHz)..
  • Best replacement for your cracked / damaged / faulted Module Card. Installation instruction is not included and professional installation is....
  • ！！！Attention. This card supports the following machine models for the 2016 model year. Dell Latitude 14 7000 series E7470. Dell Latitude 12 7000....
Check Stock