BeElion 24V AC to 12V DC Convertor, 1.5 Amp Supply Current Power Adapter and 2.1 x 5.5mm DC Power Male Plug Pigtail for Surveillance Security Camera CCTV
- ★★★★★ FUNCTION: Convert 24 Volt AC Power to 12V DC Power,This Reducer Adaptor is a simple design with great function. Convenient for installation and use.
- ★★★★★ APPLICATION: This voltage converter that is capable of powering the large IR cameras, PTZ cameras or other devices requiring 12V DC where only 24V AC is available. And suitable for most typical camera housings.
- ★★★★★ SPECIFICATIONS : Input: AC 16~28V - Output: DC 12V, 1.5A,Plug Type: Plug-in Lock.
- ★★★★★ PACKAGE INCLUDED: 1x AC 16~28V to DC 12V Power Adapter,1x 2.1 x 5.5mm DC Power Male cable,1x Package Box.
- ★★★★★ BRAND: BeElion Electronics Brand is a Registered Trademark.Only BeElion Seller is authorized to sell..
Check StockKFD DC Adapter Power for ResMed Airsense 10 Air Sense S10 AirCurve 10 Series CPAP BiPAP Machines AirCurve S10 Resmed S10 370001 37297 R360-760 370006 R370-7407 12-24V Vehicle Car Charger 24V 3.75A 90W
- ...urve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
- Resmed cpap adapter Compatite with Resmed Model: R270-7468 R2707468 IP21 R370-7296 R3707296 DA90D24 37006 370006 IP22 R370-7407 R3707407 37297 37207 370001 DA-90F24 resmed dc power converter for airsense.
- Warranty: 30 Days Free Exchange /36 Months Warranty.
- If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
- When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
- Input voltage 9-32V DC adapter, suitable for 12V cars and 24V tBus, Van, Truck, Boat, Motorhome, Yacht, Digger, Crane and portable power station.
- --Please confirm the specifications and plug size before purchasing TAIFU resmed airsense 10 power cord !If you can't make sure,pls feel free to contact us..
- Attention: 1.If the resmed 10 dc adapter works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. 2.When the vehicle charger is connected ....
Check StockUpBright 24V AC Adapter Compatible with Jebao Jecod DCS-12000 DC-12000 DCT 12000 DCP 15000 DCQ-10000 DCQ-100W DCW-10000 WP-60P TC-6A TC6A 80W 85W Marine Aqua 100W DC Pump Controller 6A Power Supply
- World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
- UpBright New Global 24V AC / DC Adapter Compatible with Jebao Jecod DC Series pump DC-12000 DCT-12000 DCT-15000 DCT12000 DC12000 DCT15000 Pumps WP-60P....
- Compatible with: Jebao Jecod DCS-12000 DCS12000 80 W 85 W Marine Aqua DC24V 80W 85W DC Pump 3170GPH Submersible Pump Jecod 100W DC Pump Controller....
- Compatible with: Jebao DCQ-10000 80W DCQ10000 DC24V 80 W Marine DC Pump Jebao DCQ-100W DCQ100W DCQ Pump Driver.
- Compatible with: Jebao Jecod DCP-15000 105W DCP15000 DC24V 105 W Marine DC Pump Flow Aquarium Reef Tank Water Sine Technology Wave Pump Driver....
Check StockGCAN-207 RS232/485 to CAN Converter,Realize bidirectional Communication Between RS232 or RS485 Bus and CAN Bus
- Standard serial port level, RS232 model or RS485 model can switch by software.
- Conversion direction can be set to: CAN?? Serial, CAN?Serial, CAN?Serial.
- Serial Bus baud rate range from 600bps to 115200bps.
- CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards.
- CAN-Bus baud rates range from 5Kbps to 1Mbps.
- CAN-Bus interface with electrical isolation.
- CAN-Bus isolation converter insulation voltage: DC 1500V.
- Working temperature range from -40 to 85 °C.
Check StockFonte KDM-MFX9350 350W ATX Slimline Power Supply for HP ProLiant N36L N40L N54L 658553-001 630295-001 620827-001
- 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V....
- 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat....
- 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer....
- 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from damage. Note: the default....
- 【Wide Application】 This power supply has variable application. It can be used as a 5V 12V 24V 30V 36V 48V power supply for RV, Car, Labtop,....
Check StockVKLSVAN 10PCS MT3608 Step Up Boost Converter DC-DC 2V-24V to 5V-28V Adjustable Step Up Voltage Regulator Module 5V 9V 12V 24V
- Product Size: 36 x 17 x 14 mm/1.44 x 0.68 x 0.56 in(L*W*H).
- With this mini step-up converter, you can easily DIY an output adjustable power supply, like 9V, 12V, 15V, 18V, 24V etc..
- Note: If the output voltage cannot be adjusted and always equal to the input voltage, please turn the potentiometer counterclockwise for more than 10 turns firstly..
Check StockVHBW CPAP Power Cord for Resmed Airsense 10 Power Supply, Fits for ResMed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine, DC 12-24V Car Charger 24V 3.75A 90W Resmed Airsense 10 DC Adapter
- The 24Volt power supply cable is great for plugging in your portable power station and charging your airsense 10. Please do not use it with a 12 volt power box..
- These dc adapters for resmed airsense 10(DC plug size: 5.5x2.1mm) with 1 interchangeable connectors(DC 5.5 x 2.5mm). It is compatible with most 24V power station like Rockpals 300w/Talentcell PB120B1/ Aimtom300w/ Progeny 300w/EnginStar 350w etc..
- This 24 V DC power cord is 3.3ft. You can use it for your Resmed Airsense 10 when camping or during power outages..
- This DC charger cable was bent to test longer service life. Anti-interference magnetic ring can keep your device stable and running..
- The airsense 10 dc converter replacement are only used for S10 (part number:37207). Please don’t use it with system one 60 series or Dreamstation series..
Check Stock90W DC Converter Charger for Resmed S10 AirSense10 AirCurve 10 Resmed 37297 37343 Air10 Resmed Airsense 10 CPAP Power Supply 11V-25V
- Input: 11V-25V Max 10a, Outinput: 24V 3.75A 90W for Resmed AirSense 10 CPAP Resmed airsense 10 power supply.
- 24V 3.75A 90W Car Charger for Resmed AirCurve 10 ASV, AirCurve 10 VAuto S ST ST-A, resmed airsense 10 power supplies,cpap battery backup power supply for resmed airsense10.
- 24V 3.75A 90W Car Charger Power Supply for Resmed AirSense 10 CPAP AirSense 10 Elite AirSense 10 AutoSet AirSense 10 AutoSet for Her.
- Compatibility : resmed airsense 10 dc converter /resmed airsense 10 power supply /resmed s9 power supply/resmed cpap machine car charger dc adapter/ cpap battery backup power supply for resmed airsense 10 s10 s9.
Check StockAcouto 20A Car Power Supply Converter Step Down Transformer 24V to 12V with Cigarette Lighter Universal Fit for Car Audio LED Radio Truck Bus
- This product is made of high quality aluminum alloy shell, high strength and durable to use..
- Allows you to convert DC 24V voltage to DC 12V voltage. Car voltage converter converts unstable voltage into stable voltage output..
- Built-in multiple protection including overload, overheat, multi-voltage and short circuit protection..
- Suitable for car audio, walkie-talkie, LED, radio, taxi advertising, monitoring system, car display, truck, bus..
- Quality Assurance---- As a professional seller, high quality products and services have always been what we stick to. Every product has passed the quality inspection before leaving the factory. Please confirm whether the product is suitable before purchasing.
Check Stock