Reviews 201tundra Oil Filter Wrench

JDMON Universal Adjustable 3 Jaw Oil Filter Wrench Remover Tool for Removing Oil filters Range 2.4 inch from 3.8 inch in Diameter Include 1/2”-3/8” and 1/4”-3/8” Drive Adapter

  • Adjustable Fit: The oil filter wrench can remove the oil filter from 2-1/4 inch to 3.8 inch(60mm-95mm) ,fit 1/4 & 1/2 inch square driver ratchet or 3/8 inch wrench which can remove various models of vehicles..
  • High Hardness Material: The oil filter wrench is made of carbon steel which is much stronger than normal material and more durable and handy to remove oil filter.
  • 3 Jaw Design: The tool is designed 3 jaw anti-drop design with firm hold on filter, helping users remove filters quickly, with less slip and without hassle. Claws fit tighter as more torque is applied..
  • Compact Design: This oil filter remover provides a low clearance, helping users dislodge filters even in tight spaces..
  • Added 2 Drive Adapter : Not only the oil filter wrench, but also 2 pcs Drive Adapter are included in box to provide the extra Drive for your oil filter.
Check Stock

ATLIN 36mm Oil Filter Socket - Fits Some Ford F250, BMW, Mini, Volvo, Audi, VW, Porsche Vehicles

  • Compatibility – This low profile oil filter socket is designed to fit vehicles equipped with a cartridge style oil filter housing. Compatible vehicles Include: Ford F250 6.0, F250 6.4, various BMW, Mini, Volvo, Audi, VW, Porsche vehicles. Also can function as a fuel filter socket, compatible with some Duramax engines.
  • Low Profile For Confined Spaces – Fuel filter and oil filter caps are often located in areas with little clearance. Designed with a height of just 1.25”, the ATLIN oil filter wrench effortlessly reaches oil filter cartridges on even the most compact of vehicles.
  • Superior Design – The 6-point hex features rounded corners to prevent rounding-off the filter canister. This design allows the 36mm wrench to grip the filter cartridge tightly with the 6 flat sides instead of the corners, preventing binding and resulting in a more secure fit.
  • Built To Last – The ATLIN oil filter cap wrench is crafted from solid chrome-vanadium (CR-V) steel. This 36mm oil filter socket will not yield under high torque applications like a cheaper cast aluminum 36mm socket.
  • Size & Materials – 3/8-inch drive, 6-point hex, 36-millimeter, CR-V steel.
Check Stock

Universal Adjustable Oil Filter Wrench From 2-1/2 inch to 4.5 inch Oil Filter Wrench Tool Set With 3 Jaw

  • Function: This oil filter wrench is designed to help you remover the toughest filters on your vehicle.This wrench has three jaws design and it will make you work much more easier..
  • Special Design: This oil filter wrench has new designed with three jaws.It will gives much more catching strength to the filters and make the remove easier..
  • Fitment: The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4.5 inch filters.Fits 1/2 and 3/8 inch square drive ratchet or 7/8 inch wrench in all kinds of vehicles..
  • High Quality: The oil filter wrench is made of 45# carbon steel which has a higher strength than normal materials.It is totally rust and corrosion resistant and waterproof.Gives it a long time performance..
  • Warranty:1-Year / 365-Days Unlimited Mileage Warranty.Your Purchase is Backed by our Rock-solid Satisfaction Guarantee..
Check Stock

Motivx Tools Oil Filter Removal Tool - Adjustable Wrench for 2.5" - 3.25" Small Diameter Spin-On Oil Filters

  • SECURELY GRIP AND REMOVE A WIDE RANGE OF FILTERS – The Motivx Tools MX2330 oil filter wrench removes small 2.5” - 3.25” diameter traditional spin-on or canister style oil filters. The wrench features a tooth style design for a secure grip that won't slip and lets you easily and safely remove the filter..
  • HEAVY DUTY CONSTRUCTION – This removal tool features a .050” captured spring as opposed to the flimsy .020” spring found on other wrenches. The jaws are built tough using nickel plated 4130 chromoly steel and attached to the 3/8” thick solid steel top plate. Low profile design gives you access to tight access spots..
  • EASY TO USE – Simply slide the jaws of the wrench over the filter while slightly rotating to the right (tighten). Once the wrench is seated in place on the filter, use a ratchet and 3/8" extension to begin ratcheting the wrench counter-clockwise (loosen). The jaws will grip the stuck filter tightly and begin loosening it..
  • PROFESSIONAL QUALITY - Motivx Tools is a specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are b....
Check Stock

Oil Filter Wrench and Drain Tool Set for Toyota Lexus Scion 2.0L to 5.7L Engines with Cartridge Style Oil Filter System Housings Fits Camry, RAV4, Highlander A7716F

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

Adjustable Oil Filter Wrench from 2-1/2 Inch to 4.5 Inch Black Oil Filter Remover with 3 Jaw Design Fits 3/8 Inch and 1/2 Inch Drive

  • Application: The 3 jaw oil filter wrench is a convenient tool helping to remove oil filter cap on cars, trucks, vans, motorcycles. The adjustable 3....
  • Specifications: The oil filter wrench can be adjusted and fit for oil filter caps from 2.5 inch and 4.5 inch. There is also a square bolt on top of....
  • Material: The 3 jaw oil filter wrench is forged with carbon steel which is much stronger than normal material. The surface is powdered with black....
  • Design: The adjustable three jaw design can be used universally. And there are anti-slip material will help to catch the oil filter cap tightly.....
  • Warranty: 100% satisfaction. If you need any help, feel free to ask and we are here to help..
Check Stock

Universal Oil Filter Wrench Adjustable 3 Jaw Oil Filter Removal Tool Range 2-3/8 to 3-7/8 inch with 1/2'' Adapter 3/8'' Square Drive Socket

  • Universal Tool - This oil filter removal tool fits oil filters ranging from 60mm to 98mm (Oil filters Range 2-3/8 inch to 3-7/8 inch). A removable 3/8-inch reducer is available for larger clearance and can be used with a 3/8-inch square drive tool..
  • 3 Jaw Design - Eastyard "claw" type oil filter wrench, ensures, with it's 3 Jaw grip, a more firm hold on the oil filter. Claws fits tighter as more torque is applied..
  • High Performance Material - 3 jaws adjustable oil filter wrench are crafted with top grade steel structure, which provides the advantage of durability and wear resistance. Finished with black-oxide coating to resist rust & corrosion..
  • Compact Design - This car filter oil change tools provides a low clearance, helping users dislodge filters even in tight spaces..
  • Bonus Gift - The oil filter wrench set includes 1/2”-3/8” drive adapter that can fit 1/2 and 3/8 inch square driver ratchet which can meet different demand..
Check Stock

Wittyware Universal Oil Filter Wrench 3 Jaw Adjustable Oil Filter Removal Tool, 2 Way Oil Filter Wrench for Removing Oil Filters from Diameters 2-1/2'' to 4-9/16'' Inches

  • This adjustable oil filter wrench can remove or tighten oil filters from 2-1/2'' to 4-9/16'' diameter (64 - 116mm).
  • The 3 Jaw oil filter wrench comes with a drive adapter, can be used with 1/2" or 3/8" square drive ratchet or wrenches.
  • The oil filter removal tool is gear-driven and heat-treated legs will handle high torque applications.
  • Get Your Stuck Oil Filter Off Easier- This oil filter wrench set is designed in adjustable 3 jaws, which to help you remover the stuck filters on your vehicle much more easier.
  • This oil filter tool is in 2 way design, can be Clockwise or Anti-clockwise operation. Increases its grip the more torque applied.
Check Stock

Caldera Oil Filter Wrench For 1.8Liter Toyota, Lexus, and Scion Vehicles - Compatible with 64mm Oil Filter Cartridges and Caps On Corolla, Prius, Matrix, CT200h, iQ, and XD

  • This 64mm oil filter wrench fits Toyota, Lexus, and Scion vehicles with 1.8 liter engines and cartridge style oil filters.
  • Compatible with Toyota Corolla, Prius, Prius V, Matrix, Scion iQ, xD, and the Lexus CT200h.
  • Crafted from high strength aluminum, this oil filter wrench is designed to withstand high amounts of torque when removing tough oil filter caps.
  • The 14 flute design of this oil filter tool ensures a tight no-play, non-slip grip on 64mm Toyota, Lexus, and Scion oil filter housings.
  • The 1.8 liter oil filter wrench can be used with both a 3/8 inch drive ratchet and a 27mm socket. Use 3/8 inch drive for tightening, and 27mm socket for loosening.
Check Stock