Reviews 2 in 1 Angle Gauge
GEARWNCH 1/2\ Drive Electronic Torque Wrench 30-340 Nm -85077
- 1/2 inch torque wrench angle gauge tool, suitable for many new engines using torsion yield fasteners..
- The 360 degree scale is marked in 2 degree increments of 10 degrees and 1 interval of 30 degrees.
- Turn the tool housing to easily reset it to zero for the next use.
- The adjustable arm keeps the angle scale fixed..
- Male and female square drivers with 1/2 inch.
Check Stock(2) JBL JRX215 1000w 15" DJ P/A Speakers+(2) 18" 1400w Subwoofers+Powered Mixer
- ...nsition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles.
- 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50.
- Crossover Frequency : 2.2 kHz Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in). Weight : 27.4 kg (60.5 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBI M115-8A. Input Connectors : Parallel Neutrik Speakon NL-4 (x1).
- .25in TS phone jack (x1). Grille : 18-gauge, powder-coated steel. Mounting & Suspension : 36 mm, dual-angle pole-mount socket. :.
Check StockGeneral Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer
- 【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
- 【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
- 【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
- 【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
- 【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..
Check StockLongacre® 52-53036 100 PSI Digital Tire Pressure Gauge
- This digital air gauge features a 2" face and includes a protective, shock-resistant protective bumper for long life.
- Ensure precise tire pressure readings on your car, bike, or motorcycle with this accurate tire gauge that reads to .2 psi with .8% accuracy.
- Features a 14" high flex hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.
- The digital tire gauge contains an air pressure release button to drop your pressure to your desired level and reduce pressure in overinflated tires.
- The pressure reading is always active with this digital air gauge, as it does not hold pressure.
Check StockPREXISO 11.5'' Digital Level & WORKPRO 10\ Contour Gauge and 6-Sided Angle Measuring Tool Combo Kit
- Package 1: PREXISO 11.5'' Digital Level - Accurate to the ±0.1° at 0° and 90° and ±0.2° from -1-89°. Measure slope angles 4 x 90˚ (total 360˚).
- Package 2: WORKPRO 10" Contour Gauge and 6-Sided Angle Measuring Tool Combo Kit - This 10" contour gauge duplicator and 6-sided angle measuring tool combo are great for duplicate the shape on tiling, wallpapering, laying carpet, laminate flooring, and much more. The combo makes projects easier..
Check StockChgImposs Metric Screw Pitch Gauge,60 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 0.25-6.0 Blades Range
- It is 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
- Measuring Range: 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0.
- It is useful to check the tool angle when cutting threads on a metal lathe.
- Check the angle on the thread cutting tool on the V-groove of the gauge.
- All 24pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check StockLongacre 2' Digital 0-60 psi Basic Digital Tire Pressure Gauge P/N 53006
- This digital air gauge features a 2" face and includes a protective, shock-resistant protective bumper for long life.
- Ensure precise tire pressure readings on your car, bike, or motorcycle with this accurate tire gauge that reads to .2 psi with .8% accuracy.
- Features a 14" high flex hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.
- The digital tire gauge contains an air pressure release button to drop your pressure to your desired level and reduce pressure in overinflated tires.
- The pressure reading is always active with this digital air gauge, as it does not hold pressure.
Check StockLittle Giant WST2-3060-36 Welded Steel Workbench with Lower Shelf, 4500 lbs Load Capacity, 36\ Height x 60\ Width x 30\ Depth
- Welded steel workbench with lower shelf and 4,500 lb. total load capacity.
- 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
- Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
- Gray powder coat finish for resistance to chipping and corrosion.
- 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check StockLittle Giant WST2-3672-36 Welded Steel Workbench with Lower Shelf, 4000 lbs Load Capacity, 36\ Height x 72\ Width x 36\ Depth
- Welded steel workbench with lower shelf and 4,000 lb. total load capacity.
- 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
- Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
- Gray powder coat finish for resistance to chipping and corrosion.
- 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock