Reviews 2 Flute Spiral Point Taps
Viking Drill and Tool by Norseman 43550 Type 240-B Bright Finish 118 Degree HSS Drill Set (115 Piece)
- 115 pc Set High Speed Steel Bright Finish Jobber - General Purpose 118-Degree Point.
- 1/16 - 1/2 by 64ths, #1 - #60, A - Z 118-Degree Point.
- High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials.
- Bright finish increases chip flow in softer materials such as aluminum, wood and plastic.
- Spiral flutes with a higher flute angle to remove chips more easily.
Check StockDrilling, Reaming, Tapping and Milling on the Drill Press (DVD)
- High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
- High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
- Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
- High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
- Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check StockChampion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool
- High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
- High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
- Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
- High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
- Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check StockRUKO 101026 Step Drill Bit HSS SP in Steel Plate
- Completely in high-alloyed tool high-speed steel..
- Split point on the tip ensures well-centred drilling and lower required feed rate..
- The deep cut and spiral-shaped flute ensures absolute smoothness and top cutting performance..
- Particularly strong swarf is carried cleanly out of the bore as with a spiral drill. This lessens the build up of structural cuts and galling in the bore..
- The cone makes pulling back from the bore easier..
Check StockMuzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit
- Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
- Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
- BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
- Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
- EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
- Each compartment is labeled with sizing for simple identification.
- PACKAGE CONTENTS: Combination set contains both metric taps and dies.
- Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
- (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check StockDrill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\
- Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
- Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
- NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check StockOCGIG Large Spiral Groove Step Drill HSS Cone Bit Hole Cutter Stepped Up Unibit 6-60mm 12 Steps for Aluminium Metal Wood PVC
- Material:HSS4241, High hardness, rustproof, solid and durable.
- Split Point Tip:Increases cutting speed with self-centering and prevents walking.
- Spiral Design:2 Flute spiral blade design makes the cutting faster and smoother, and automatically deburred from the hole when the drill bit is drilled.
- Application:Suitable to cut holes in a variety of material like iron plate, aluminum plate, insulation boards, PVC sheet, ect.
- Package includes:1 x 6-60mm HSS Groove Step Drill (12 Steps:6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm).
Check StockMachine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap
- Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
- Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
- BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
- Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
- EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
- Each compartment is labeled with sizing for simple identification.
- PACKAGE CONTENTS: Combination set contains both metric taps and dies.
- Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
- (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set
- ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
- ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
- ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
- ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock