Reviews 2 Aluminum Alloy Part

6061 T651 Aluminum Angle 3\X 4\X 48\ Long 1/4\ Thick

Aluminum Slash Wheelie Bar Kit for 1/10 Traxxas Slash 2WD, Rustler, Bandit trucks..
This CNC Machined aluminum wheelie bar kit is 7" in length and allows a variety of tuning options with an adjustable angle, double or single wheel setup options, and limits flex with solid aluminum ladder frame construction..
Rubber tires to allow smooth rotation and low drag..
CNC Aluminum alloy construction offers an extra level of protection for the motor and transmission case.
Aluminum Adjustable Wheelie Bar Kit was developed for No Prep RC Drag Racing.This part Is for On Road Speed Run and is NOT recommended for off-road use..

kit contains:1 hand grinder, 1 special glass bottle，1 aluminum alloy bottle with spoon,1 glass bottle with spoon, 1 funnel.
It is suitable for grinding coarse powder into fine powder, but not suitable for large block or hard things.
Diameter: 2.2 inches, height: 4.5 inches, 4 layers.
Handle crank, ultra-fine grinding, middle screen filtering fine powder.The funnel part can be screwed directly into the bottle for storing spices.
Exquisite packaging, suitable for outdoor carrying or gift giving.

...The table arch holder Kit Reduce the time of the splice bar, Only 2 Minutes, Take it out and pull it straight Then just link the base on both sides, 2 steps to build the tabletop balloon stand kit! (Tip: Need Two people are required to pick up the straightened pole at the same time and arch it into the C-clamp.).
【ALUMINUM ALLOY C-CLAMP】 Strengthen design The C-clamp wide adjustable range can 6Cm/2.36Inch fit most of the tables, The C-clamp mounts are made from strong engineering aluminum alloy with a sponge pad, will not hurt the table. There is an auxiliary screw tool under the clip, no other tools are needed. (Tip: The clamp fits in a 6cm thickness table, Please check the thickness of your table before you purchase.).
【PACKAGE INCLUDED】The balloon arch stand comes with 10 poles Total length 13Ft glass fiber poles with Bold shock cord inside, 2 aluminum alloy C-clamps, and 30pcs balloon clips, and 2 Tying Tool. Recyclable, The balloon arch garland kit height and width of the balloon arch are adjustable for your table size, Great for all DIY balloon occasions..
【QUALITY SERVICE】The Table Balloon arch kit with base can be used indoors and outdoors, for a birthday party, baby shower party, graduation party, wedding, Christmas, or other holida....

Product Name : Aluminum Rear Shock Mount - 2Pc Set.
Made from quality light weight high tensile strength aluminum 6061T6 for good sturdiness and support. Multiple positioning holes for adjusting angle of the shocks to suit different driving condition..
Accessories included : Stainless Steel Round Head Screw 3x20 2pcs.
Stainless Steel Flat Head Screw 3x10 4pcs.
Will fit : Element RC (Team Associated) 1/10 Enduro Sendero 4WD Offroad Trail Truck #40100.

Only fit for 4WD RC cars,do not fit 2WD.Compatible with Traxxas Slash (VXL) 4x4, Rustler (VXL) 4x4, Stampede (VXL) 4x4, Ford Rally 1/10 4WD RC car..
Made of aluminum alloy,CNC machined for high precision,durable to use..
Replacement Part NO.:1952,please check the original part NO. for reference.
Easy to install,a good replacement part for broken or old one..
Package includes 2 x Rear Stub Axle Knuckle 4wd.Lightweight upgrade instantly enhances overall performance in handling and durability..

Package - The package contains 2 pack hot wheels car decals. (Size - 3.15 inches * 1.58 inches * 0.2 inches) The two hotwheels badges contain two powerful stickers..
Material - Hot wheels car emblems are made of high-quality aluminum alloy materials. High-quality alloy materials can withstand various weather conditions. It is not only waterproof, but also rust-proof. It is more durable than other plastic car signs on the market..
Easy to install - No tools are needed, and it can be installed quickly in 2-3 minutes. ①Clean and dry ②Peel off and paste ③Short press to make sure the 3M glue of each part is firmly adhered..
Applicable Models - Exterior car stickers are suitable for most models, such as golf carts, SUVs, MPVs, RVs, motorcycles, and can also be used for daily necessities such as laptops and refrigerators. FJB truck stickers can be used on doors, trunks, tailgates, grills, or as art toolboxes..
Wonderful Gift - Provide funny stickers to friends or family members who need stickers, you will feel funny and happy..

Kit Contains: (Part Number: TRZ6AL) Aluminum 6" Adjustable Drop Hitch w/Locking Ball Mount // (Part Number: SXT5) Key Receiver Lock // (Part Number:....
Aluminum 6" Adjustable Drop Hitch w/Locking Ball Mount Details: (Part Number: TRZ6AL) Includes: Dual 2" & 2-5/16" Chrome Balls & Receiver Lock // 2....
100% Stainless Steel Key Receiver Lock Details: (Part Number: SXT5) Wide Span: 5/8" x 3-1/2" // Fits Class V Receiver Hitches // Made of Machine....
2-1/2" to 2" Class V Receiver Hitch Adapter Sleeve Details: (Part Number: TAS25) Universal Fit // Use with any 2" Steel or Aluminum Ball Mount //....

Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining..
This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder.
Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved..
Set includes: 1x Tool Post 1x 3/8" boring holder, 1x 1/2" capacity cut-off blade holder, 2x 1/4-3/8" turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
Silver parts are made of aluminum, The black part is made of iron.