Reviews 2 54mm Pin Header

SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans* in Black SST-CPF04-USA Newest Version

2200μF capacitor provides stable voltage.
Support speed detection for accurately controlling fans.
PWM 4pin header x 8, compatible with 3pin cable (Speed control function is unavailable for 3 pin fans. Attached 3 pin fans will run at maximum RPM)..
Compact size at only 54mm (W) x 19mm (H) x 40mm (D). Included 3M adhesive to apply anywhere within your case..

Flexible PVC sheath, flexible and durable, environmental protection, length: 20.3 inches/515mm..
Jumpers can reduce the stress on the rear USB expansion board or the front panel USB port and the connection between the expansion card and the motherboard port and eliminate stress..
USB motherboard cable The 9-pin motherboard PCB is a 9-pin 2.54 mm pitch male-to-female motherboard extension cable..
Note: The color of the wire is different due to different batches, but the wiring contact and the card position are in the same position, which will not affect the function of the product..
Package included: 1 x USB 2.0 Internal Motherboard Header Cable..

Perfect for Arduino mega sized base board and other programming boards.
Convenient for the prototypes and circuit design experiment and other DIY projects..
Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits..
Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc..
Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching..
Made of glass fiber FR-4 material, features high heat resistance, corrosion resistance, mechanical strength, insulation..

4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
PWM splitter cable connects an additional fan to increase airflow in your computer case.
Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
Add more cooling to your computer with t....

The esp8266 module is 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
1 analog input(3.2V max input). Micro USB connection.
WiFi internet development board 5V 1A switching power supply (switching power supply）onboard..
5V relay shield is a digital switch to control much higher voltages and currents than esp8266 mini microcontroller, controlled by the D1 , the relay will switch to allow current to flow or turn off, depending on wiring..
40 pin 0.1inch (2.54mm) male pin header connector PCB board pin strip electronic component, they are easy to be cut to any length if needed, you can cut or score with some electronic tool..
The pin header is an ideal connector for the PCB board and intergrated circuit, used widely in the computer and breadboard, compatible with raspberry pi or other electronic project..

The Breadboard Kit is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino mega board and other programming boards..
Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits..
Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc..
Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching..
Made of glass fiber FR-4 material, features high heat resistance, corrosion resistance, mechanical strength, insulation..

348 holes of prototyping area, Full breakout of the 40-pin Pi Header.
Holes are connected in row and column groups.
Silkscreen marking for 40-pin Pi Header reference.
High quality HASL PCB finishing, D0.9mm drill holes and D1.9mm pad size.
Pin Headers set: 1 x extra long 40-pin (length: 12mm) stacking header, 1 x short 40-pin (length: 6mm) stacking header.

The features of this board is that you don't have to insert the pins of components and kits in the group of holes. Components and kits can be mounted....
Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own....
Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit,....
Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching. To be your....
Made of glass fiber FR-4 material, having the features of high heat resistance, corrosion resistance, mechanical strength, insulation..

PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
1 to 2 case fan splitter connects an additional fan to....
Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
Fans can spin at the same speed using....
Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
Sleeved and wrapped black 4-inch PWM Y cable provides a....
3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....