Reviews 2 1 Pre Amplifier

Preamplifier

  • ►TOPPING Pre90 Preamplifier: Fully balanced amplifier structure for both balanced and single-ended signals. Pre90 could set volume memory for each input or volume memory for each output. More easy operation with the remote controller..
  • ► Selectable XLR / RCA output: The output of Pre90 could be config to “XLR only”, "RCA only" or "XLR + RCA ". Therefore, the amplified signal can be connected to two different amplifiers. Good combination with EXT90 D90..
  • ►Ultra-high Performance NFCA modules: It provides excellent DC and AC performance. Ultra-low noise of 0.3uv is milesahead of the competition, giving an absurdly high dynamic range of 145db and no audible noise and darkest background..
  • ►Ext90 could extend you more inputs: A standard Pre90 provide you 1 x RCA and 1 x XLR stereo inputs. But when it working with a Ext90, they could provide totally 2 x RCA and 4 x XLR stereo inputs. This is enough for multi source systems..
  • ►Relay volume control: A large number of high quality Japanese small signal relayIsed fovolume control of Pre90. Brings the advantages of precise control remote control, longevity, and complete channel balanceIf the volume was set high while turn on or switch in, Pre90 will automatically reduced to a safe volume to avoid your ....
Check Stock

(6) Rockville RKL65MBW 6.5\ 700w Marine LED Speakers+Receiver+Amplifier+Amp Kit

  • Package Includes: (3) Pair of RockvilIe RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles. (1) RockvilIe RXM-S6 Marine/Boat 2600 Watt 6 Channel Amplifier + PA Microphone. (1)RockvilIe RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (2)RockvilIe MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin. (1) RockvilIe RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote. Includes: Pair of 6.5" Marine LED Speakers.
  • 16.4 feet of Speaker Wire. Stainless Steel Mounting Screws. Black and White Grills Included. Pair RockvilIe RKL65MBW 6.5 2-Way 700 Watt Marine Boat Speakers with LED Lights. CEA Compliant Power Ratings. Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker. Total Power: 700 Watts. Beat sync LEDs flash to the rhythm of the music. You can select either red or blue color LEDs on the wire harness. No extra installation for the LED. It gets a power signal through your speaker wire.
  • The louder the music the more intense the LEDs flash. Black and White detachable Grills. Fully Marinized Against Salt & Fresh Water Conditions. Sun Light Treated cone makes this completely Waterproof and rustproof. Anti-corrosion Stainless Steel Terminals. Molded ABS plastic for amazing sound and protec....
Check Stock

Rockville RGHR45 4 Zone Marine Gauge Hole Receiver Bluetooth/Radio/Wired Remote & RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS with Status Mode LED Indicator

  • ...ver with 4 Zones that each have independent volume control, Includes wired remote with the ability to control the volume in each zone, 3” TFT color display makes it easy to navigate, Built in Bluetooth/USB/AM/FM playback, Fits into a standard Gauge-Hole (Tachometer) Opening, Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS), 3 pairs of pre-amp outputs..
  • Product 1: 4 zones each with volume control (zone 1 = built in amplifier, zone 2 and 3 are RCA outputs, and zone 4 is the sub output), Built in EQ with preset EQ curves (Pop, Classic, Rock, Jazz, Beat, Flat), IP66 Waterproof Certification (Tested to withstand the elements), USB Input to play back audio files store on a USB thumb drive or any other USB device, USB plays video, RCA A/V input to play back a video source, Rear camera input, RCA Aux Input..
  • Product 1: AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning, Bluetooth built in to stream audio from any Bluetooth enabled device, USB Input Charges Your Phone, Big easy to use buttons, Back-lit 3 inch TFT display, IP66 waterproof level, meet ASTM B117 and ASTM D4329 standards, Humiseal coated PCB board for waterproofing and protection from the elements, Required cutout: 2.99" (diameter) x 4.96" (depth) x 4.53” (t....
Check Stock

Complete Violin Concertos

  • Headphone output: balanced Connection: 4.4mm, 3.5mm x 2, XLR4/unbalanced Connection: 6.3mm, 3.5mm, headphone input: Walkman/Xperia portable to charge Walkman)/USB.
  • Da hybrid amplifier circuit for a sensitive and natural sound, DSD remastering engine converts all PCM source to DSD 11.2MHz, DC phase linearizer simulates the phase character of an analog amplifier.
  • Acoustically tuned panel eliminates unnecessary resonance for sound, fbw chassis (frame, Beam and wall structure) provides rigid structure, eccentricity Insulator prevents mechanical resonance.
  • Double layer bottom plate for a low point of gravity, analog output - use as a D/a converter or pre-amplifier.
Check Stock

Rockville SK512 Package 12 1400w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Rockville Single 12" K5 1400w Car Subwoofer Pre-loaded In Vented Sub Enclosure. Peak Power Handling: 1400 Watts.....
  • CEA Rated RMS Power Handling: 350 Watts. Final Impedance: 4 Ohm. ¾” MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15....
  • Satin Nickel speaker wire push terminals. Enclosure air space is 1.52 Cu Ft per sub. Vent dimensions (inches): 2.25" x 7" x 8.5". Tuning frequency of....
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote..
  • CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such....
Check Stock

AUTOTEK MM4020.1D Mean Machine 4000w Mono Car Stereo Amplifier+Amp Kit Class D

  • Package Includes: (1) Autotek MM4020.1D Mean Machine 4000 Watt Mono Amplifier Car Stereo Amp Class D. (1) Rockville RWK41 4 Gauge Complete Wire Kit....
  • Crossover: Electronic. Variable Low Pass Crossover (12 dB Per Octave): 40Hz - 300Hz. Tone Control/Parametric EQ: Built-In Bass Control. Class: D. Bass....
  • Low Noise Pre-Amplifier Circuitry: Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which....
  • Electronic Equalizer: Electronic equalizer provides control of amplifier output with onboard electronic crossover to tailor specific frequencies to....
  • Heat Sink: Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heat sink underside. Power Supply:....
Check Stock

DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W (Bluetooth Amp),Bluetooth Amp

  • tpa3116 amplifier 100W Subwoofer Amplifier Board.
  • Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
  • tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
  • This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board..
  • bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
  • Speaker impedance: bass speaker impedance: 2-8 ohm.
  • You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier.
Check Stock

Audio Kit for Arcade Game, MAME Cabinet, or Virtual Pinball Machine

  • 1 Kinter Stereo Audio Amplifier (18w per channel, Bass & Treble adjustments).
  • 2 of 4" Dual Cone Round Speaker (Dual cone for better Frequency Range (Hz):90Hz-20KHZ).
  • 2 of 4.5" Black Speaker Grill (Black metal frame, black metal grill, screws).
  • 1 Speaker Wiring Kit (2 sets of 6ft 22 Gauge Red/Black speaker wire with pre-crimped .110" and .187" connectors).
  • 1 RCA Audio Cable, 20 Black 1/2" Screws, 12v 2a or 3a Power Supply (Depending on availability).
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock