Reviews 2 0 Inch Tft

Hantek1832C Handeld 40kHz LCR Meter with Carry Case, 0.6Vrms

100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz test frequency, 0.6 Vrms test level, 0.30% accuracy.
Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
reset function: open/short circuit calibration.
2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.

High speed SPI display with digital I2C touchscreen driver.
Single-touch capacitive touch bonded on top.
240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.

Video digital camcorder: 2.8 inch TFT LCD(16:9),available with 270 degree rotation, fill-in infrared LED light, item size:4.44″ X 2.67″ X 1.65″.
Long lasting battery: 3.7v 1050 mah li-ion battery (package included). Rechargeable lithium battery, can be sustainable 2-3.5 hours after full charged..
Camcorder Features: FHD 1080P camera camcorder,face capture, auto power-off, anti-shake, with internal microphone, speaker, LED light, USB2.0, and TV output..
This Full HD Video Camcorder is small size, record your special lovely moments. And can be mount tripod(not included) at the bottom of the camera..
Easy to carry, perfect to be a gift for the children, beginners, the elderly. For amateurs, not for professional users..

100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz/50kHz/75kHz/100kHz test frequency, 0.3/0.6 Vrms test level, 0.30% accuracy.
Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
reset function: open/short circuit calibration.
2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.

【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
Upgrade the firmware by SD card. It is easy and convenient to....
【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....

Hardware Features: 9 drawbars, 6 high resolution metal dials, TFT color display.
Organ Emulation Features: 3 full polyphony manuals, Percussion (including harmonic, attack, decay), Tonewheel emulation (including leakage and condition), Mechanical emulation including keyclick and key contact delay simulation.

The unit does not have a touch screen. There is no built in memory. There is no built in battery. There is no remote control included.
View hi-quality digital photos on the 8 Inch TFT true color LCD at 800 x 600 resolution. High quality wood frame with easy to use controls.
Photo slideshow mode will begin automatically once the frame is powered on.
Supports various picture formats as most file formats are automatically recognized.
Supports SD / SDHC memory cards (up to 32 GB).
Connect a USB flash drive or SD card to easily access and share your favorite photos.Frame adjustable for vertical orientation.Dimensions: 8.5 x 1 x 7 in. (21.6 x 2.5 x 17.8 cm).
Weight: 1 lb. (16 oz).Package Contents: 8 Inch Digital Photo Frame,Frame Stand, Power Adapter, Quick Start Guide, Registration Card / Warranty Card - 1 year.
View hi-quality digital photos on the 8" TFT true color LCD at 800 x 600 resolution.
Supports memory card formats such as: SD / SDHC.
Frame stand adjustable for vertical orientation.

【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
Upgrade the firmware by SD card. It is easy and convenient to....
【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....