BOSCH HDC250 SDS-Max Hammer Dust Collection Attachment
- Dual air chambers provide for both dust collection during use and provide suction to the wall.
- Dust port fits Bosch 1-3/8-Inch vacuum nozzle and can convert to 1-1/4-Inch / 2-Inch hose nozzles.
- Replaceable brush ring provides seal for multiple bit diameters.
- Optimized for drilling diameters from 1-1/2-Inches to 5-Inches but can accommodate up to 6-Inches if the brush ring is removed.
Check StockBOSCH HDC200 SDS-Max Hammer Dust Collection Attachment
- Dual air chambers provide for both dust collection during use and provide suction to the wall.
- Dust port fits Bosch 1-3/8-Inch vacuum nozzle and can convert to 1-1/4-Inch / 2-Inch hose nozzles.
- Replaceable brush ring provides seal for multiple bit diameters.
- Optimized for drilling diameters from 5/8-Inch to 1-3/8-Inches, but can accommodate up to 2-1/2-Inchs if the brush ring is removed.
Check Stock2 Count TENS Wires Pin Electrode Wires for TENS Unit Electrodes Cords Lead Wires TENS Cable
- 2 Pieces Premium Quality TENS Lead Wires.
- Used to connect the electrical current from TENS device to the electrodes.
- 4mm Diameters Plug to 2mm Diameters Pin, Wire Length: 63 inches/ 160cm.
- Please kindly follow our pictures to make a quick check if you are not sure..
Check StockGear Aid Tent Pole Splint, Replacement Part, 5/8' Black
- A tent pole splint that instantly repairs broken tent poles and comes in two sizes.
- Fits tent poles smaller Than 1/2” (12 mm) or 5/8” (16 mm) in diameter.
- Weighing under 0. 10 oz. , its durable and lightweight design Made of anodized aluminum ensures this fix last for years.
- 1/2” splint’s outer diameter: 0. 5” or 13 mm.
- fits pole diameters up to 13/32” (11 mm).
- 5/8” splint’s outer diameter: 625” or 16 mm.
- fits pole diameters up to 17/32” (or 13. 5 mm).
Check StockDESIN Carburetor Carbon Dirt Jet Cleaner Repair Tools Kit Engine, Airbrush, Spray Gun Cleaning
- Stainless Steel And High Density Nylon, Good Elasticity, No Hair Loss.
- Wires Set 4 Inch : 2x Come With 13 Different Diameters Comes With A Lightweight, Compact Aluminum Carrying Case.
- Brush Set 4.1 Inch :18x Cleaning Needles 12x Cleaning Brushes 2x Wrench.
- Different Diameters: 1mm, 2mm, 3mm, 4mm, 5mm, 7mm..
- Micro Needle Stainless Steel Wire Winding, Rust, Flexible Handle, No Deformation.
Check Stock12 Pcs 25mm (1 Inch) Round Plastic Plug,Round Tubing Black Plastic Plug,Pipe Tubing End Cap for Round Tube Furniture Finishing Plug
- The 1" round plastic plugs only fit 25mm (1inch) outside diamefer round tubing or pipe. (not inside hole diameters ,not inside hole diameters) Designed to fit inside hole diameters from 0.81" to 0.93".with a wall thickness 0.020" - 0.060".(Refer the Size Picture).
- Material: Made of high-quality plastic, durable and wear-resistant. Waterproof and compressive wear proof..
- Uses: Provides long lasting protection, great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliderschair leg protectors, patio furniture inserts, and much more..
- The 1 Inch round threaded inner plug can be used as a durable solution for home or outdoor projects, including replacement of fence/door railing covers, trailer frame ends, rod tube rod caps, wrought iron steel decorative plugs or any round opening. Not easy to deform, firmer, not easy to fall off, easy to install..
- We believe that our round Tubing Post End Cap, will exceed your expectations. If you have questions, please contact us any. We will try our best to solve your problems..
Check StockNICECNC Rear Spoke Nipple Set fit 17\ Wheel Compatible with HONDA SS50 C70 CL70 CD70 CT90 CT110 C110
- ▲ They will also Replacement for Honda/Yamaha/Suzuki/Kawasaki vintage models.
- ▲ Rear set spoke diameters are 3.2 mm and nipple diameters are 5.83mm.
Check Stock6\ Divider Caliper Wing Compass Metal Marking Circles Machinist Wood
- Made from stainless steel with hardened and finely polished points, 350mm(14") long.
- There are one inside caliper and one outside caliper, inside caliper is available in the same size range as outside caliper.
- Firm joint calipers use friction at the joint to hold the legs not move.
- Outside calipers measure thicknesses and outside diameters of objects, inside calipers measure hole diameters and distances between surfaces.
- Great for you to measure the external and internal size of an object, such as sculpture, pottery and so on.
Check StockAlltrade 648439 Adj. Cylinder Hone Deglazer (2\ to 7\), Black
- For deglazing engine cylinders 2" To 7" In diameter.
- Knurled wheel adjusts spring pressure of stones against cylinder bore. Set screw and adjustable collar allow setting hone to 2 different maximum diameters for easier handling.
- For deglazing engine cylinders 2-Inch to 7-Inch in diameter.
- Knurled wheel adjusts spring pressure of stones against cylinder bore.
- Set screw and adjustable collar allow setting hone to 2 different maximum diameters for easier handling.
- Hone features 3 replaceable 4-Inch long 220 grit stones.
Check Stock