Reviews 1pin Video Cable Pinout

Monoprice XLR Male to RCA Male Cable - 6 Feet - Black With E21Gold Plated Connectors | 16AWG Shielded Twisted Pair Oxygen-Free Copper Braid Conductors - Premier Series, 104777

Buy with confidence: with Monoprice lifetime on all cables, you can rest assured we stand behind our products and our customer.
An XLR to RCA cable converts a balanced Audio signal into an unbalanced signal..
This is good for sending Audio signals from an XLR source to an RCA input, or vice versa. Regardless of direction, The result will be an unbalanced signal..
The cable is made with two 16 AWG Oxygen-Free Copper conductors, in a twisted-pair arrangement, and is shielded along the full length with copper braid with 97. 5% coverage..
This cable uses the standard pinout with pins 1 and 3 of the XLR connector wired to the shield of the RCA Plug and pin 2 of the XLR connector wired to the tip of the RCA Plug..

6ft RS232 Serial cable: DB9 F/F cable has 28WG copper wire, and double shielded with foil & metal braided ,Effective EMI (electromagnetic interference) and RFI (radio frequency interference) suppression ..
DB9 cable adopts black PVC molded and injection molded shell, which eliminates heavy load strain and makes it strong and reliable..
DB9 pin female to female cable, 9-core fully connected, It is pin to pin wired as a Straight Through (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G) color: black brown red orange yellow blue purple gray white. purple gray white..
D-SUB 9 PIN female connectors adopt gold-plated PIN, good contact, stable signal transmission and reduce loss..
DB9 serialess adapter connects PC laptops to some older RS232C equipment such as scanners, modems, printers, plotters, cameras, bar code/embroidery machines, touch screens, microcontrollers, factory test equipment.

This harness is ideal for replacing old harness in any old JAMMA cabinet or for customers who are bulding new machines with JAMMA boards..
This is Brand new Jamma Harness with 2x28pins 56 Pin connector that can be used for standard Jamma Arcade cabinet (Machines) and PCBs..
All wiring uses 22AWG (22AWG is enough for Jamma PCB ) ,Cheaper harnesses will only use 24AWG or 26AWG or even (Marked with 22AWG but actually with 24 or 26 AWG quality ).
Video signals connect through included standard monitor connector..
Full Grounding Loop for all those joystick/button micro-switches on your control panel.Easy to follow installation with below pinout sheet !.

The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant.
The chip is Atmega + 2560-16au and 16u2, same with the official version..
Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
It contains everything needed to support the microcontroller.
simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..

(NOT USB to VGA adapter) USB to serial adapter FT232 cable allows your computer to make communication with serial devices equipped with 9 pin female....
USB to male serial port adapter cord is designed for connecting Serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode....
(FT232 chip) Long FTDI serial cable to USB adapter for Windows 11,10, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later (9 wire pinout 1-9: DCD, RXD,....
COM port serial to usb converter is designed with a high performance quality processor chip (FT232RL), which makes this USB RS232 adapter one of the....
10ft DB9 RS232 to USB adapter with 9 pin male to USB-A male gold plated connector uses crystal clear blue enrich injection, strong and beautiful.

【Here’s What You Get】: 1 x power adapter, 1 x high-quality AC cable【SAFETY RELIABILITY】All of our product lines are put through rigorous....
【GUARANTEE】: Within 30 days of purchase, we offer a no-questions-asked full money back guarantee. Additionally, for 1 years from the date of....

Equipped with addressable RGB LED lights, you can control and change the 250 colors by connecting to motherboard or other RGB controller, High density LED. Light is spread evenly thanks to high density LED's and diffuser. Easy cable routing. Daisy chain all of EZDIY DDR RGB heat sink with standard RGB 4-1pin (5V, Di, -, G)..
Aggressive aluminum heat spreader - Fierce black heat spreader designed to complement the smooth RGB lighting..
2 pieces of thermal conductive silicone pad included to assist the heat dissipation of high loading memory RAM..
Supports all kinds of Memory card DDR DDR3 DDR4, High/low and single/double side(s) RAMs.
Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync.

Equipped with addressable RGB LED lights, you can control and change the 250 colors by connecting to motherboard or other RGB controller, High density LED. Light is spread evenly thanks to high density LED's and diffuser. Easy cable routing. Daisy chain all of EZDIY DDR RGB heat sink with standard RGB 4-1pin (5V, Di, -, G)..
Aggressive aluminum heat spreader - Fierce black heat spreader designed to complement the smooth RGB lighting..
Supports all kinds of Memory card DDR DDR3 DDR4, High/low and single/double side(s) RAMs.
Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync.

The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3，RoHS Compliant.
The chip is Atmega+2560-16au and 16u2, same with the official version..
Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes..
Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
It contains everything needed to support the microcontroller.
simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..