Reviews 190mm Nozzle

IC3D Grey 1.75mm PLA 3D Printer Filament Mega Spool (10kgs) - Dimensional Accuracy +/- 0.05mm - Professional Grade 3D Printing Filament - MADE IN USA

PLA Plastic (Polylactic Acid) - a eco-friendly polymer which is harder than ABS, and melts at a lower temperature.
Filament Diameter: 1.75mm (Dimensional Accuracy +/- 0.05mm).
Recommended Nozzle Temperature: 190 - 240C - Depending on type of 3D printer, printing speed, and ambient conditions.
Compatibility: Works with all 1.75mm 3D printers including Makerbot, Afinia, Lulzbot, Flashforge, Solidoodle, 3D Doodler (pen), Mbot, and Type A.

...d easy operation and gives a much better finish than brushing.
Wireless Sprayer Gun with completely detachable design for easy cleaning. Remove the motor parts and battery after use, then you can soak them in water to clean. Please clean sprayer as soon as possible after each use..
【3 SPRAY PATTERN & 3 SIZE COPPER NOZZLE & 15 PAINT FILTER】: Get the vertical, horizontal and circular spraying patterns through adjust the ears of the air cap to suit the shape of the object you’re spraying.
3 different size (1.0mm,1.8mm,2.5mm)of copper nozzles are not easy clog than plastic nozzle.
15pcs paint strainers are great for you to filter particles in paint for better spraying..
【ADJUSTABLE FLOW】: Regulate your paint output by adjusting the flow control knob on the sprayer to get different paint output, suitable for edges, corners and broad interior surfaces of various work..
【COMPLETE PAINT GUN SET】: Package include 1x Paint Sprayer Gun, 1x 1000ml Container, 2x 4000mAh Rechargeable battery, 1x Charger, 3x Size Nozzles(1 Nozzle has Already Been Installed on The Gun) , 15x Cone Paint Filter (5pcs each of 50,100,190 micron), 1x Viscosity Cup, 1x Nozzle Cleaning Needle, 1x Earplug, 1x Cleaning Brush, 1x User Manual..

【GLOW PLA FILAMENT】Contains 30% luminous powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 1 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect..
【DIMENSIONAL ACCURACY】1.75mm diameter,1kg pla spool,recommended extrusion/nozzle temperature: 190°C - 230°C,dimensional accuracy + / - 0.03mm. Advanced CCD diameter measuring and self-adaptive control system provide a smooth printing experince.That is perfect for PLA filaments..
【PREMIUM QUALITY 1.75MM PLA FILAMENT】Uniform winding of 3D printer filament free of getting tangle.Full mechanical winding and strict manual examination guarantee the PLA filament is tidy and easy to feed. To avoid being tangled, insert filament end into spool holes after every use.Strong layer adhesion leads to the first perfect printed layer..
【PACKAGING 】Vacuum packaging with desiccant to keep it dry and keep out dust and foreign objects away, prevent nozzle jams..
【GIFT FOR KIDS】 Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability..

PACKAGE INCLUDE: 16 PCS glue gun sticks..
SIZE:7.2mm*100mm.Viscosity: 2000~6000mpa.s@190℃ Recommended temperature: 180 ～ 210 ℃..
COLOR:Black, Brown and Yellow,three colors can be selected,you can select the color depending on person's hair color..
Application:The glue gun sticks can be used with Hair Extension Glue Gun & pre-bonding Hair Extension,i-tips hair extension..
TIPS: 1.Please warm up the glue gun for 3-5 minutes before using the glue stick. 2.Keep the surface of the hot-melt adhesive bond clean to prevent impurities from blocking the nozzle. 3.When the glue gun is not in using, please stand upright on the table, and do not lay it flat, otherwise it will cause the glue pouring phenomenon..

Recommended Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-60℃, Print Speed 30-90mm/s.
Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament.
No bubble, Tangle-free, Clog-free. Bright colors.
Vacuum sealed with desiccant. Bonus - an extra reseal bag for storing used filament and a notecard.
After-sales service: Find us from the card, any question will be provided with a satisfactory solution.

Includes the benefits of carbon fiber with substantially increased temperature resistance when annealed. Comes on fully corrugated recyclable spool....
Matte Black finish on prints that hides layer lines for more attractive Printed parts.
Processing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles (&let.
We recommend printing this material at 190c-230c using a 4 mm or larger nozzle. Please Note that this filament is more brittle than normal PLA and....
Designed and manufactured in the USA with quality and customer service as a top priorities. Usa sourced packaging and labor.

1.75MM PLA Filament Temperature: The nozzle temperature setting for printing with PLA is 190-210 degree. Our engineers recommend starters set 200 degree of printer nozzle and 55 degree of hot bed for getting excellent printing effect..
3D Printing Filament Feature：PLA material has the characteristics of strong adhesion, good melt, stable feeding, no warpage, no clogging of nozzles, etc. These characteristics ensure its stable operation..
3D Printer Filament Harmless：PLA Filament is made of a biological material extracted and purified from corn. It has no Bubbles, and harmless to humans. It will not harm the health of you and your family when you work..
3D Printer Filament Bundle First Choice： The pla material is very safe and only has a small odor. It has strong layer adhesion, good melt and smooth feeding. It is your first choice whether considering safety factors or practical aspects..
PLA Filament 1.75MM Bundle Multiple colors: The colors of this combination are diverse and beautiful. There are five color-White, Black, blue, Purple and Red, included in the package. You can use them to print models with different colors..

For handler 125EZDescriptionHobart Flux-Cored 1/2in. Welding Nozzle fits Hobart Handler 125, 140, 187, 190, 210, 210MVP and TREK 180 welding guns. 1/2in. size. Product Type: Nozzle, Product Style: Flux-cored, Size: 1/2 in., Works With: Hobart Handler welder.

Recommended Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-60℃, Print Speed 30-90mm/s.
Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.05mm, Net weight 1kg (2.2lbs) filament.
No bubble, Tangle-free, Clog-free. Strong glittering effect, especially under light.
Vacuum sealed with desiccant. Bonus - an extra reseal bag for storing used filament and a notecard.
After-sales service: Find us from the card, any question will be provided with a satisfactory solution.