Reviews 16ch Video Input

Vehicle Backup Cameras Monitor HD 1080P 12V/24V ,4X 4 Pin AHD Car Reverse Rear View Camera Kit + 7' inch IPS 4CH Quad Split Monitor for Bus Truck Trailer RV Heavy Duty

  • 4Pin Aviation connector HD 1080P Car Backup Camera for Motorhome Parking System: 7" Quad Split 4CH IPS AHD Monitor +4x HD 1080p 18 IR LED Night Vision Reverse Camera + 4 Pins Connector Cable. Hard wired connection guarantees safe and clear and stable reversing image.
  • HD 1080P Car Color Rearview Camera (140°horizontal wide view angle )18 LED IR Night Vison IP 68 Waterproof with Rear View Mirror image Without Grid Lines,Image with 1920x1080 pixels, Much More clear than other cmos / ccd camera.
  • 7 inch 4CH Video Quad Split IPS AHD Monitor.The display screen is large and the picture quality is great. it can be set the video with Full images/2 images/3 images/4 images adjustable, image can be flip with mirror or none mirror, you can set each camera for front view or rear view at your enjoy.
  • reversing Grid line Can Be turn on off with CH2 input.
  • Support all 12v 24v vehicle,and come with 2x 20m/66ft ,2x 10m/33ft 4pin Extension cable cable for Long Bus Truck Trailer RV Van Motorhome Schoolbus Camper fifth wheel Lorry and other heavy Duty.
  • There is 3x trigger wire to control 3 video input priority，can be connect for reversing gear trigger+,turn left light+ ,turn right light+.
Check Stock

HDMI Audio Extractor - Tendak 4K HDMI to HDMI Audio Splitter and Optical Toslink SPDIF + 3.5mm Stereo HDMI ARC Adapter Converter Support 3D ARC for PS4/3/ Pro/ Roku/ Bul-Ray

  • HDMI Audio Extractor: One HDMI input to one HDMI output(pass mode), with optical and 3.5mm stereo audio output. Extract the sound from the HDMI input....
  • ARC Function (Audio Return Channel): Extractor the audio from TV to soundbar or amplifier. Connect your TV HDMI(ARC) port to Tendak audio adapter HDMI....
  • Audio EDID Settings: With 2.1CH, 5.1CH and pass model. SPDIF output supports up to DD & DTS 5.1CH audio.
  • RCA analog L/R output supports 2CH PCM stereo....
  • Without Signal Loss: Resolution max support up to [email protected], bandwidth up to 18Gbps to achieve the synchronization of audio and video signal, there are....
  • Wide Compability: Suitable for various HDMI source devices like Roku or Chromecast without dedicated audio output as well as Blu-ray/ DVD/ HD player,....
Check Stock

4K@60HZ HDMI Audio Extractor, HDMI 2.0b Audio Splitter Converter, HDMI to HDMI + Optical Toslink SPDIF + 3.5mm Stereo Audio with Control Output Analog Volume Knob Compatible for PS5/4/3/Blu-ray player

  • HIGH RESOLUTION 4K@60Hz- HDMI audio extractor optical supports resolution up to 4K@60Hz, 4K@30hz, 1080P@30hz, 1080P @60hz and lower, HDR, HDCP 1.4 and HDCP 2.2, YUV 4:4:4, 3D deep color and 18 Gbps bandwidth, support HDMI 2.0, downward compatible for HDMI 1.4, ensure full compatibility with all of the newest audio-video & streaming devices. Installs in minutes and Plug&Play, More Clear, More Delicate,Give You a Nice Feeling of Home Theater..
  • SPLITTER WITH VOLUME KNOB- The HDMI audio extractor 3.5mm has 1 HDMI export and 1 HDMI output port: Connect HDMI export to a monitor, the monitor will output video. So the product is an HDMI extractor and HDMI splitter with control output analog volume knob, you can control HDMI extractor volume. Note: This unit does not support the ARC function..
  • 3 AUDIO MODE SETINGS- HDMI audio extractor splitter have Pass, 2.0CH, 5.1CH 3 kinds of audio mode options. 3.5mm audio output supports 2CH PCM LPCM stereo audio.
  • Optical SPDIF output supports 2CH PCM, 5.1CH Dobly Digital, Dobly TrueHD, DTS-HD, DTS.(Please set audio format on HDMI Source to PCM/ LPCM format to use If your device can't support these formats)PCM Setting Path: Device homepage -- system setting -- image and sound -- voice setting -- digital audio output -- PC....
Check Stock

Soundstream VRN‐75HB in Dash Media, 7"

  • Turn-by-turn GPS navigation of USA (powered by iGO primo 9.0) | complete integration of select Android enabled devices | Bluetooth V4.0 hands-free calling from enabled phone.
  • Playback from DVD & CD of MP3, 720P MP4 & other video | playback from 64GB USB of MP3, MP4 & other video | 2a 5V Adaptive fast charge of mobile devices (rear).
  • ID3 MP3 tag reading for track & artist information | rear audio/video input for personal media devices | front & rear RCA pre-amp audio outputs | subwoofer RCA audio pre-amp output.
  • Rear view Camera input w/ trigger | 300W 4Ch. Mosfet speaker outputs | custom backgrounds & screen savers | multi-region FM frequency stepping.
  • A2DP Wireless MP3 Audio Playback from Enabled Device | Built-in Front Panel Bluetooth Microphone Front 3.5mm AUX Audio Input.
Check Stock

Vowish 4K 2x2 Video Wall Controller, HDMI & DVI Input TV Wall Controller with 8 Displayer Mode, Support 180 Degree Rotate, RS232 Control for Sports bar, Restaurant, School, Company, Home Theater, Mall

  • 【4K Large Screen Splicing】This 4K 2x2 video wall controller supports 1 HDMI or 1 DVI input (such as PC, laptop, DVD, etc.) and 4 HDMI outputs. The video wall splicer can split a full HDMI high-definition image signal into 4 blocks and distribute them to 4 video display units, such as rear-projection units, LCD TVs, etc..
  • 【8 Display Modes】Multiple splicing modes: 2x2, 1x2, 1x3, 1x4, 2x1, 3x1, and 4x1 meet different splicing needs. It plays a crucial role in commercial video displays and security fields. In addition, advanced remote control through RS232 is also supported..
  • 【180° Screen Rotation & Edge Masking】If you use a high-definition TV as a screen, it allows you to rotate the screen 180°. Excitingly, you can install the TV in the direction of the thinnest edge. But your input device must be [email protected] Note: 180° rotation can only be used in 2x2 mode..
  • 【[email protected] High Definition Resolution】Supports input video resolution of [email protected]/30Hz, [email protected]/30/50/60Hz and output resolution of [email protected] (per display). It restores the original a....
Check Stock

XYGStudy for Raspberry Pi 4B/3B+/3B/2B/B+/A+ Jetson Nano High-Precision AD/DA Expansion Board Sheild Onboard ADS1256 DAC8552 ADC DAC Jumper

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate. Onboard DAC8552, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal. Onboard input/output interface via screw terminals, for connecting analog/digital signal. Features AD/DA detect circuit, easy for signal demonstration.
Check Stock

HDMI Audio Extractor 1080P HDMI to HDMI + Audio SPDIF + Coaxial+3.5mm Audio Splitter Converter

  • Extract the digital HDMI audio signal from the HDMI input and convert it to coaxial output or spdif audio output.
  • Supports the highest video resolution to 1080p. Supports 225MHz/2.25Gbps per channel bandwidth.
  • Audio EDID Settings: 2CH for L/R or SPDIF stereo output.
  • 5.1CH for SPDIF Output, Supports uncompressed audio such as LPCM. Supports compressed audio....
  • Compatible with devices such as Blue-ray, DVD/HD/DVR players, cable/satellite, Amazon Fire TV, Apple TV, PS3/4, Xbox, PC/laptop, HD cameras and more.
  • Note: The default channel setting is 2.0CH and the 5.1CH audio output is only support by the Toslink and coaxial sockets. If the audio source is....
Check Stock

AllAboutAdapters RF Coax to HDMI VGA Component YPbPr Video Demodulator TV Tuner for NTSC System

  • 2-In-1 RF coax TV tuner solution for decoding RF coax CATV signals into 1080p HDMI output or HD Component YPbPr video audio output. Professional grade agile RF coax demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920x1080 pixels. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
  • Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Backward compatible with all DVI equipments via using HDMI to DVI adapter..
  • Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details..
  • Multiple of these RF demodulator/tuner units can work....
Check Stock

Diamond Audio MICRO4V2 4-Channel 600 Watts RMS Class D Amplifier

  • Ultra-compact, high density aluminum alloy chassis provides superior thermal stability | Four layer, glass epoxy circuit board for enhanced performance and reliability | Full Range Class D amplifier technology | Bridgeable for high power operation (CH1+CH2/CH3+CH4) | Balanced differential inputs for superior noise rejection.
  • Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Input selector switch (2 CH / 4 CH) | Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) | Fully variable, 12dB per octave, electronic crossovers | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Illuminated logo.
  • RMS Power Rating - RMS Power (2Ω): 150W x 4 | RMS Power (4Ω): 80W x 4 | Bridged (mono 1Ω): N/A | Bridged (mono 2Ω): N/A | Bridged (mono 4Ω): 300W x 2 | Topology: Full Range Class D Power Supply | Power Supply: Full PWM | Power Supply Threshold: 10.0VDC - 17.0VDC | Idle Current: (0.7A).
  • Distortion - THD 4 (1KHx @ 4Ω): 0.5% | S/N Ratio (A weighted @1W): -85dBA | S/N Ratio (A weighted @FP): -101.1dBA | Input Sensitivity - Low Input Level....
Check Stock