Reviews 140mm Fan Grill 2

Phanteks Enthoo Pro Full Tower Chassis without Window Cases PH-ES614PC_BK,BLACK NO WINDOW

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.
  • Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

GDSTIME 4500RPM 8cm 80mm x 80mm x 25mm 12v Big Airflow High Speed Dual Ball Bearing Brushless DC Cooling Fan 2 Pin

  • Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H).
  • The center to center distance beween the mountiong holes is 71.5mm/2.81in..
  • Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • (-): Black wire. This is a two wire cooling fan.
  • Life: working up to 50000h at 25 degrees..
  • 4*M4x35mm screws & nuts( The metal grill is separate with fan and it is mounted by screws.).
Check Stock

CORSAIR Hydro Series H110i AIO Liquid CPU Cooler, 280mm Radiator, Dual 140mm SP Series PWM Fans, Advanced RGB Lighting and Fan Software Control

  • Large 280mm radiator: more cooling capacity for cases which have 280mm radiator mounts.
  • Improved cold plate and pump design: better efficiency gives you lower temperatures with less noise.Radiator dimensions: 140mm x 322mm x 27mm,Fan dimensions: 140mm x 25mm.
  • Advanced SP140L PWM fan design: better high-static pressure air delivery and customizable speed.
  • Built-in Corsair Link: monitor CPU and coolant temperature, adjust fan speed, and customize lighting directly from your desktop.
  • AMD bracket included compatible with AM4.
Check Stock

Aigo Halo Ring LED Case Fan 140mm 14cm Quiet Edition Sleeve Bearing High Airflow Silent Cooling Fan for Computer Cases, CPU Coolers, and Radiators (140mm, Triple Pack White)

  • Four LED Colors Available: As a excellent LED cooling system, It has four LED color for customer choose: Red/White/Blue/Ice Blue, the fan can provide a very gentle and dreamlike expression by emitting soft, constant, and bright led light..
  • Features standard 140mm mounting holes :  140mm fan is a best replacement for common 140mm case fans and perfect fitment on 140mm water cooling radiators. It provides high cooling efficiency..
  • Hydraulic Bearing with Low-Noise Design：The hydraulic bearing with high quality. making aigo fan spin at 1500RPM at low 29dBA and deliver an air flow of up to 49.8CFM.
  • Anti-vibration Mounting System:  The fans come with eight pre-installed rubber anti-vibration pads reduce vibration between fan and PC case. Ultra-Silent Case Fan that Keeps Noise Level Down to 29dBA.
  • IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time..
Check Stock

Bgears 2 Pieces Pack Cooling Fan Grill 90mm

  • Dimensions: 120 x 120mm / 4.7 inches x 4.7 inches (length * width).
  • Center distance of mounting hole: 105mm / 4.1 inches.
  • Package contents: 5 Pcs x 120mm cooling fan grill.
  • The computer finger guard is made of metal,Suitable for most 120 mm / 4.7 inch fans, can be used for 120mm Fan Grill , Wire grill makes sure it doesn't block too much airflow , Keeps stray wires or fingers safe from fans.
Check Stock

CORSAIR iCUE 7000X RGB Full-Tower ATX PC Case, Black

  • ...d cool thanks to clever cable management and a spacious interior..
  • The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single hidden channel, with an easy-access hinged door and a roomy 30mm of space behind the motherboard for all of your cables..
  • Includes four 140mm CORSAIR SP RGB ELITE PWM fans with eight individually addressable RGB LEDs per fan, utilizing AirGuide technology to concentrate airflow and enhance cooling..
  • An included CORSAIR iCUE COMMANDER CORE XT Controller, CORSAIR iCUE software, and PWM fan repeater enable smart RGB and fan speed control out of the box..
  • A massive interior lets you fit up to 12x 120mm or 7x 140mm cooling fans, or install multiple radiators including 3x simultaneous 360mm or 2x simultaneous 420mm for extreme cooling..
  • A motherboard tray with customizable fan mounts allows you to side-mount up to 4x 120mm fans or up to a 420mm radiator, opening up a new world of cooling options..
  • Put the spotlight on your graphics card with a three-slot vertical GPU mount on the PSU shroud, big enough for today’s most powerful graphics cards..
  • A fully equipped front I/O panel includes a USB 3.1 Type-C Port, 4x USB 3.0 ports, and a combination audio/microphone jack..
Check Stock

Antec NX410 ATX Mid-Tower Case, Tempered Glass Side Panel, Full Side View, Pre-Installed 2 x 140mm in Front & 1 x 120 mm ARGB Fans in Rear (White) (9734088000)

  • 3 ARGB Fans Included : 2 x 140 mm ARGB fan in front & 1 x 120 mm ARGB fan in rear..
  • Tempered Glass Side Panel : Tempered Glass Side Panel can enjoy the simple and clean white appearance without losing the gorgeous RGB effect which inside your rig..
  • High Efficiency Cooling Design : 2 x 140mm ARGB fan which installed in front of the case, effectively drive the air convection to achieve awesome cooling effect for your rig..
  • Grid Front Panel Design : The staggered grid design improves the overall appearance design sense and achieves the ultimate efficiency and beauty on the basis of keeping the heat dissipation..
  • MOBO Support : ATX, micro-ATX, ITX, Provide a variety of MOBO size options at 390 mm x 210 mm x 485 mm Case's size..
Check Stock

Electric Gel Ball Blaster, Splatter Ball Blaster High Speed AKM-47 with 20,000 Water Beads Suitable for Boys Kids Adults Age 12+

  • ...ing on the research and development of computer accessories. R & D product lines include: CPU air-cooled radiator, case fan, thermal silicone pad, thermal silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities..
  • 【Product specification】Thermalright FS140 BLACK V3.
  • CPU Cooler dimensions: 140(L)x146(W)x160(H)mm (5.51×5.75×6.3inch).
  • heat sink material: aluminum, CPU cooler is equipped with metal fasteners of Intel & AMD platform to achieve better installation. The offset asymmetric layout is allowed to installation on first graphics card slot, and the height is compatible with memories within 62mm..
  • 【2 PWM Fans】TL-C12B and TL-D14B, Standard size PWM fan:120x120x25mm (4.72×4.72×0.98 inches) and 140x152x27mm (5.51×5.98×1.06 inches).
  • Noise Level≤25.6dB(A). The high speed of the dual fans will greatly improve the cooling effect, which can easily take away the hot air and prevent the CPU from running normally due to high temperature..
  • 【AGHP technique】4x8mm heat pipes apply AGHP technique, Solve the Inverse gravity effect caused by vertical / horizont....
Check Stock