Reviews 12volt Water Pump

SeaChoice 19301 Submersible 2000 GPH Bilge Pump

  • 【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V.
  • 【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
  • 【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
  • 【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
  • 【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..
Check Stock

SHURFLO WASHDOWN Pump KIT Blaster II 3.5

  • TOUGH, RUGGED, HIGH PRESSURE: The ProGear 5550 Power Blaster Water Pump was designed with a unique 5 chamber diaphragm and internal by-pass for longevity and performance. High Pressure when you need it where you needit. Our pump is built for high pressure on demand, low noise and no rapid cycling. No fear, this pump can run dry with no water, runs quiet, and thermally protected..
  • HIGH PRESSURE AND HIGH SPEED. Use for Power Spraying: Boats, Fish Boxes, Anchor Wells, Dinghies, RV’s, Patios, Decks,.
  • HEAVY DUTY: Our heavy duty, Professional Grade 12 Volt DC self-priming pump provides up to a 14 foot lift, quiet operation and is CSA Certified. We stand behind our products and the ProGear 5500 High Performance water pump is backed by a 2-year no hassle warranty..
  • MADE IN AMERICA: This water pump is proudly made in the USA using high quality, tough, durable, and long-lasting parts. SATISFACTION GUARANTEED.
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

IEIK Water Pressure Diaphragm Pump DC 12V Pressure Switch Sprayer Pump 5LPM 1.35 GPM 116PSI 165ft Self Priming Pump for Caravan RV Boat Marine Agricultural Spraying Port

  • FEATURES: This water pressure diaphragm pump has a configuration power of 60W, so it has a strong water flow (5L / PM 1.35GPM) and strong pressure (116 Psi = 8.0 Bar).
  • if you worry about water pressure or water flow is small, I think This water pressure diaphragm pump will be a good choice.
  • due to pressure and flow greater than 4L / min water pressure diaphragm pump, so the noise will be slightly larger..
  • FUNCTION: All water pressure diaphragm pump have sealed switch and coating to prevent corrosion.
  • water pressure diaphragm pump in the case of power supply, as long as there is water flow, it began to work, close the valve that will automatically stop working. It is common that diaphragm pump melting or burning when it is overloaded or blocked. IEIK pressure diaphragm pump with upgraded protection device can solve this problem effectively. All of our water pumps are equipped with this upgraded protection device to avoid melting or burning. IEIK water pressure pumps not only can help you to solve the problem of water pressure, but also ensure safety when working..
  • PARAMETER: Water pressure diaphragm pump vertical suction lift: 5ft (1.5m).
Check Stock

Electric Fuel Pump 12V Universal Low Pressure 12 Volt Transfer Inline Fuel Pump for Lawn Mower Carburetor Gas Diesel Engine 2.5-4psi HEP-02A

  • 【Specification】Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch )..
  • 【Compatibilty with】Electric Fuel Pump 12v Universal, fits for Trucks, Carburetor, ATV, Marine, Motor, UTV, All 12 Volt Cars, Boats, Generators, Lawn Mower.
  • 【Performance】Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, plunger-type fuel supply, suction stronger, more stable oil supply, 12 Volt Fuel Pump, two-wire design, can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • 【Easy to install】Light weight, quite operation, easy to fit and connect: 2 bolt fixing, 2 wires design..
  • 【Note】If you have any questions about our fuel pump, please contact us for a satisfactory solutions..
Check Stock

Electric Fuel Pump 12v Universal - Low Pressure 12 Volt Inline Fuel Pump for Lawn Mower Carburetor Gas Diesel Engine 2.5-4 Psi

  • Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • Electric Fuel Pump 12v Universal, fits for lawn mower marine motorcycle carburetor, all 12 volt cars, trucks, boats & generators with gas diesel gasoline petrol engine.
  • Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, plunger-type fuel supply, suction stronger, more stable oil supply.
  • 12 Volt Fuel Pump, two-wire design, can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere.
  • 1-Year-Warranty, made of High Quality & Durable Material, manufactured in ISO 9000 / ISO 9001 / ISO 9002 Certified Facilities and 100% mechanically tested ensures optimal performance and enhanced durability.
Check Stock

Superior Pump 92911 1/2 HP Cast Iron Primary Sump Pump and Backup Pump Kit , Black

  • Primary pump-pumps up to 4200 gallons per hour, pumps water up to 25 vertical feet.
  • Pre-assembled kit: Primary pump model 92511 cast iron sump pump and 12V DC backup pump.
  • Kit includes 87 decibel alarm, electronic control panel with indicator lights, battery box, mounting hardware, 2 AMP DC charger (12 volt deep cycle battery not included).
  • Vertical float switch on primary and backup pumps.
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock