Reviews 110 Impact Tool

Cable Matters UL Listed 6-Pack RJ45 Shielded Keystone Jack with Integrated Shutter

  • Cat6A connector is backwards compatible with Cat 6 and Cat 5e bulk cable.
  • 180 degree easy termination jack supports tool free or crimp tool termination.
  • A 180 degree wide-angle, hinged design provides easy access and termination.
  • Tool free cap has universal T568-A or T568-B labels.
  • IDC modules accept a 110 impact tool for wire insertion.
  • compatible with the Cable Matters Cat6A Crimp Tool Model 180087.
  • Superior construction combines a one piece metal keystone to suppress EMI/RFI electromagnetic interference, NEXT, and AXT crosstalk.
  • Stickers on the inside prevent accidental contact with the metal housing.
  • Integrated metal collar assists with cable strain relief.
  • Snap-in retaining clip ensures a secure connection.
  • Auto-closing shutter protects the RJ45 contacts.
  • Plug in a Cat6A patch cable to open the shutter.
  • PoE plus compliantShielded RJ45 connector for IEEE 802.3at Power over Ethernet (PoE+) network applications up to 30W with a Cat 6A Ethernet cable.
  • Standards compliance includes a UL listed flammability rating, TIA/EIA 568-C.2, IEEE 802.3an 10GBASE-T, and ISO/IEC 11801 Class E.
  • compatible with a PoE IP camera or PoE access point.
Check Stock

DEWALT 20V MAX Combo Kit, Compact 4-Tool (DCK420D2)

  • DCD780 20V MAX* 1/2″ drill/driver features two speed transmission(0-600/0-2000RPM)12345.
  • Dcf885 20V max* 1/4″ impact driver features 3 LED light ring withe 20 second delay to provide visibility without shadows.
  • Dcs381 20V max* reciprocating saw with keyless blade Clamp allows for quick blade change without touching blade or reciprocating shaft.
  • DCL040 20V max* LED work light delivers 110 Lumens of light output.
  • *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.Power Tool Type:Cordless.
Check Stock

ZAISHANG Electric Car Jack 5T Hydraulic Floor Jack DC 12V Car Jack Kit with Electric Impact Wrench, Car Lift Emergency Tire Change

  • [Efficient Electric Car Jack Kit] 5 Ton electric car jack and electric impact wrench all in one tool case, meet all your needs of changing a tire..
  • [Fast and Convenient] Powered by cigarette lighter or car battery, fully auto, lift a car in one minute, save time and energy compare with manual car jack. Can also be connected to a 110v to 12 v DC power converter..
  • [Powerful Car Jack] This car jacks have a maximum lifting weight of 5 tons (11000 lbs) and a lifting height range of 6.1 to 17.7 inch. Suitable for most vehicles under 5 ton, Sedan, SUV, MPV, Truck etc..
  • [Electric Impact Wrench] This electric car jack kit includes a 1/2 inch portable electric impact wrench with two socket adapters with four sizes, matching most vehicles. Max torque 420 N.M. Helps quickly remove tire screws.
  • [Higher Stability and Safety] Car jack will automatically stop lifting after reaching the height limit and has self-locking function to protect car not fallen-down during use if cut-off power..
Check Stock

Hitachi DH28PFY 1-1/8 Inch SDS Plus Low Vibration Rotary Hammer, 3-Mode, VSR

  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
  • Featuring User Vibration Protection (UVP) technology to reduce the vibration transfer to the user.
  • drilling only, hammering only and hammer drilling for flexibility within a range of applications.
  • Increased durability achieved by incorporating an optimized hammering mechanism similar to Hitachi's larger hammer line.
  • Faster drilling speed achieved by combining the powerful motor and optimized hammering mechanism.
  • 8 Amp motor that produces 2.5 ft/lbs of impact energy for powerful hammering with fast drilling.
  • 0-4,300 full-load impact rate delivers forcible hammering.
  • Electronic variable speed control gives the tool a no-load RPM of between 0-1,110 and 0-780 in reverse.
  • Larger side mounted mode selector dial makes transitioning between modes simple and efficient, even when wearing gloves.
  • Angle adjustment position available on mode selector dial to change the chisel bit to different angles.
Check Stock

DEWALT 20V MAX* Impact Wrench Detent Pin Anvil Kit, Mid-Range, Tool Connect, 1/2-Inch (DCF896P2)

  • 1/2 inch cordless impact wrench has 330 ft-lbs of max fastening torque and 600 ft-lbs of max breakaway torque to complete a wide variety of applications..
  • Compact design of only 6.95-inch and 3.48 lbs allows access to tight spaces and reduces user fatigue for DEWALT 1/2 inch impact wrench..
  • 3 fully customizable modes of the battery impact wrench allow you to personalize your impact wrench through the Tool Connect app including setting: Speed, LED brightness and delay, Precision Wrench Control and Precision Tap Controls..
  • Precision Wrench allows user to set runoff speed in reverse helping to prevent fastener runoff. In forward, users can set pause before impact and auto shut off times to aide in fastening consistency..
  • Precision Tap automatically alternates the tool between forward and reverse allowing for easier and faster cutting of threads (vs. manual tapping)..
  • DEWALT built brushless motor for increased efficiency and runtime vs. brushed models..
  • Variable speed trigger helps provide speed control to the user..
  • Through the Tool Connect app receive diagnostics on your impact wrench such as internal coin cell battery life, tool temperature, number of trigger pulls and how long the tool has been running..
  • Track your tool utilizing the last seen feature which ....
Check Stock

Best Choice Products 38x21.25in 44-Piece Wall Mounted Peg Board, Garage Storage Rack, Tool Organizer w/ 28 Storage Bins, 14 Accessories, 110lb Capacity

  • TOOL AND ACCESSORY ORGANIZATION: Cleans up your garage or workshop, perfect for hand tools and small parts like screws, nuts, and bolts.
  • 3 BIN SIZES: 44-piece storage unit fits everything, including 4 large bins, 12 medium bins, 12 small bins, and 14 tool storage accessories.
  • CUSTOMIZABLE SETUP: Equipped with 2 back panels, allowing you to organize bins and accessories to best suit your needs.
  • HIGH-QUALITY MATERIAL: Durable organization system is made of impact-resistant plastic to last you for years to come.
  • OVERALL DIMENSIONS: 38"(L) x 7.25"(W) x 21.25"(H).
Check Stock

DEWALT DCK590L2 20-Volt MAX Li-Ion 3.0 Ah 5-Tool Combo Kit

  • Power Tool Type: Cordless. 20V MAX hammer drill with patented 3-speed all-metal transmission and 1/2-inch self-tightening chuck.
  • 20V MAX reciprocating saw with key-less blade clamp allows for quick blade change.
  • 20V MAX 1/4-inch impact driver features 3 LED lights with 20 second delay to provide visibility.
  • 20V MAX LED work light delivers 110 lumens of light output.
  • 20V MAX circular saw with 6-1/2-inch carbide blade can cut 2-by-4’s at a 45-degrees angle.
Check Stock

Klein Tools VDV427-110 Impact Punchdown Tool Extended Reach 110 MIM Replacement Blade with Bayonet-Style, Twist-and-Lock Socket

  • Used to punch cables into 110 panels and blocks in tight spaces.
  • Terminate and cut wires in one step with MIM (metal injection molding) precision blade.
  • Works with Klein's Impact Punchdown Tool (VDV427-300).
  • Extended length great for working on active panels with pre-existing connections.
  • Easy blade insertion with bayonet-style (twist & lock) form factor.
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock