Reviews 10 Leads Ecg Cable

Cable Matters 2 Pack 12V Replacement Cigarette Light Plug Cord with Leads - 15A Fuse and Green Indicator Light

Repair or replacement 12V cigarette lighter power cord with leads provides a solution for powering 12 volt devices such as a CB radio tire inflator, air compressor, cooler, water pump and more.
12V cigarette plug is compatible with a standard 12 V cigarette lighter socket for providing 12V DC power to equipment with wires for soldering or crimping.
Leads can be cut-off to directly terminate the cord to your equipment or wires.
Simple installation of 12volt adapter cable by plugging in the 12 volt plug into a 12V plug socket and attaching the leads to equipment wires.
Easy-grip treads on the 12V plug make is easy to unplug the cigarette power adapter.
Cost-effective 2-pack of power inverter cables provides a spare or replacement 12V cable for the garage, RV, or another vehicle.
compatible with CB radios such as the Uniden CB radio or Cobra CB radio.
Safe design of 12V plug with leads includes a 15 amp replaceable fuse and 16 AWG gauge zipcord wire that is rated up to 60C/140F and color-coded with red/positive and black/negative.
Leads on 12V adapter are secured with heat shrink tubing and can be removed for directly wiring the cord.
Molded strain relief on the 12V male plug reduces stress on the 12V adapter cord.

6-pin I/O power cable for Allied Vision Mako USB3, Point Grey Blackfly, Basler ace GigE, racer GigE, AVT, Baumer, Sony, Dalsa, JAI, Imaging source, CCD cameras.
Connector female 6-pin compatible for Hirose HR10A-7P-6S.
The cable has 6-pin female connector on one end, and 6-core bare wire (also called pigtail open leads) on the other. The cable has a label with pin-to-wire color assignment.
Length available 1 meter, 2 m, 3 m, 5 m, 10 m, other lengths please message me.
High flex, braided shielded, PVC jacket cable. For assembly of power and/or I/O cables.

This full red gridded Bio-Net EKG graph paper is manufactured with the medical standards dimension.
ECG chart paper comes with the following dimensions: 215mm x 25 meter.
This order will deliver 5 rolls of “BIONET EKG-GP” ECG recording paper.
Bionet EKG recording paper is suitable or compatible with CadioCare 2000 and CardioTouch 3000.
The heart rate recordings are made distinctly flawless.EKG interpretation is made easy for clinicians through these perfect ECG paper.

Transforms signal impedance from 75 Ohm used in coaxial cable to 300 Ohm used in antennas.
Compatible with all Channel Master outdoor TV antennas, convert outdoor antenna connection to coaxial cable input.
Matches an unbalanced, coaxial F-type cable with balanced twin leads, connect 75 ohm cable to 300 ohm TV antenna terminals.
Crimped, soldered spade lugs, integrate and durable signal.
There is no requirement or need to ground either lead this would remove the balance from the system because the left and right twin leads connect to a....

GE Marquette 9402-061 ECG EKG Paper is designed for compatibility with Mac 1200, Mac 1500, Mac 1600 electrocardiograph machines..
Featuring red full grid, measuring 8.5"x11" our GE Marquette 9402-061 ECG EKG Paper comes with 16 Packs per case..
Latest industry requirements are kept in mind while manufacturing the GE Marquette 9402-061 ECG EKG Paper proudly made in USA..

Mortara ECG EKG Paper is designed for compatibility with ELI 250, ELI 350, and XSCRIBE electrocardiograph machines.
Featuring red full grid, measuring 215mm X 280mm our Mortara ECG EKG Paper, which comes with 5 Packs per case and 200 sheets per each pack.
Latest industry requirements are kept in mind while manufacturing the Mortara ECG EKG Paper.

Type of AA Battery Holder: 1 aa battery holder, 1x 1.5V aa battery holder with leads.
Package Contents: 5Pcs 1 aa battery holder with wires.
Voltage Output of One 1 AA Battery Holder: 1.5V, 1x 1.5v single aa battery= 1.5 volt aa battery holder.
Dimensions of 1 AA Battery Holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm(L*W*H).
Weight of "single aa battery holder": 0.141oz/4g.
Leads: all aa battery holder with leads, they are tinned wire end.
Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
DIY Extension: Join two 1 X 1.5V single aa battery holder with leads can get a 3Volt aa battery holder.
Join three 1 X 1.5V single aa battery holder can get a 4.5Volt aa battery holder.
Join four, join five, join six......So, by simple DIY, you can got 3Volt aa battery holder, 4.5Volt aa battery holder, 6Volt aa battery holder, 9Volt aa battery holder..

3-Pin JR plug male to male connector servo extension lead wire cable..
There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..

Type of AA Battery Holder: 1 aa battery holder, 1x 1.5V aa battery holder with leads.
Package Contents: 6Pcs 1 aa battery holder with wires.
Voltage Output of One 1 AA Battery Holder: 1.5V, 1x 1.5v single aa battery= 1.5 volt aa battery holder.
Dimensions of 1 AA Battery Holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm(L*W*H).
Weight of "single aa battery holder": 0.141oz/4g.
Leads: all aa battery holder with leads, they are tinned wire end.
Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
DIY Extension: Join two 1 X 1.5V single aa battery holder with leads can get a 3Volt aa battery holder.
Join three 1 X 1.5V single aa battery holder can get a 4.5Volt aa battery holder.
Join four, join five, join six......So, by simple DIY, you can got 3Volt aa battery holder, 4.5Volt aa battery holder, 6Volt aa battery holder, 9Volt aa battery holder..