Twidec/Output Single Phase SSR Solid State Relay 80A 3-32V DC to 24-480V AC SSR-80DA
- Model No.: SSR-80DA;If you want to reach 80A, you need to add a large heat sink and fan.
- output Voltage : 24-480vac;Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A,It is necessary to separately configure the heat sink..
- Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
- material : metal, plastic, electronic parts.
Check StockAITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board
- 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
- DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
- 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
- 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
- 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
- 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check StockOver-Voltage Under-Voltage Protection Monitoring Relay Circuit Breaker Adjustable Control Module DC 12V/24V/36V/48V(DC24V)
- Voltage RegulationWhen a faulty line occurs, the voltage protection relay can adjust the overvoltage value and the action time, and record the fault for more flexible use..
- Real-time MonitoringThe voltage protection relay can monitor overvoltage and undervoltage faults in real time and take protective measures in time..
- LED DisplayThe voltage protection relay includes two sets of normally open and closed contacts, and the two indicator lights respectively indicate different working states..
- Rail MountingThe voltage protection relay adopts a standard modular structure and is mounted on a 35mm rail without additional auxiliary power..
- Our ServiceWe strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check StockWireless Rf Remote Control Switch, Safe Connection Receiver Relay Switch 220v 433mhz(1 CH)
- ✔Easy to set up and easy to use. The relays are very simple to set up and use. Specifically designed to control a variety of electrical equipment via wireless signals..
- ✔Small size, stable and reliable performance, high receiving sensitivity. The relay is designed to be small and simple, does not take up space, and powerful performance can be used for a long time..
- ✔The relay supports fixed code and learning code, and supports 1-channel or 2-channel receiver relay switches, which fully meet the needs of different users..
- ✔Excellent security. The circuit board of the relay is safely packaged, the circuit board is exquisite, and the wiring is safe. Safety protection measures are perfected to protect your safety..
- ✔A wide range of applications. From simple home remote control to door, window, lifting equipment, access control, up and down controller, alarm system industrial control, security system and other automatic controllers can be used in various fields..
Check Stock5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance
- ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
- UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
- SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
- ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
- WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stockuxcell 2 Pcs 4.7 Ohm 2 Pin Refrigerator Start Relay for Compressor Black
- Total Size: 3.2 x 2.2 x 2.85cm / 1.26" x 0.87" x 1.12".
- Pretty generic start relay used on various brands of mini fridges and coolers.
- How to Select Relay : Shop relay, consistent of size,resistance and pin quantity as replacement.
- Relay Breakdown Judgment : For start relay,shake it,with noise of debris collision,is broke..
Check StockEVTSCAN Latest DPA51CM44 3-Phase Monitoring Relay, Current/Voltage Monitoring Relay Phase Sequence Protector for Three-Phase System, Without Neutral, Phase Loss, 208-480VAC
- ✈ PRODUCT NAME---Voltage Monitoring Relay.
- Protection function: over voltage, under voltage.
- Contact capacity: 6A 250VAC (resistivity).
- ✈ REAL-TIME MONITORING---The voltage monitoring relay could achieve real-time monitoring of dc overvoltage and undervoltage faults, and over-voltage, under-voltage value, and action time can be adjusted.
- ✈ MAIN FEATURES---The voltage monitoring relay is of 2 sets of normally open and normally closed contacts, 2 indicator lights indicate various working conditions, no additional auxiliary power supply is required.
- ✈ 35MM GUIDE RAIL---With 35mm guide rail and standard modular structure, the voltage monitoring relay is easy to install, easy to operate.
- ✈ TYPICAL APPLICATIONS---The voltage monitoring relay is typically applied in dc motor, battery,UPS power supply, dc switchgear, dc panel, industrial control system.
Check Stockuxcell AC 110V H3Y-2 Time Delay Relay Solid State Timer 0-60S DPDT w Socket
- Package Content: 1 x Time Relay w Socket.
- Timer Size: 57 x 27 x 21mm / 2.2" x 1" x 0.8" (L*W*H).
- Socket Size: 75 x 22 x 30mm / 3" x 0.87" x 1.2" (L*W*H).
Check StockVoltage Monitoring Relay DC 12V/24V/36V/48V Over-Voltage and Under-Voltage Protection Relay 35MM Guide Rail 13-17V 10-14V DC48V
- Protection function: over voltage, under voltage.
- Contact capacity: 6A 250VAC (resistivity).
- REAL-TIME MONITORING---The voltage monitoring relay could achieve real-time monitoring of dc overvoltage and undervoltage faults, and over-voltage, under-voltage value, and action time can be adjusted.
- MAIN FEATURES---The voltage monitoring relay is of 2 sets of normally open and normally closed contacts, 2 indicator lights indicate various working conditions, no additional auxiliary power supply is required.
- 35MM GUIDE RAIL---With 35mm guide rail and standard modular structure, the voltage monitoring relay is easy to install, easy to operate.
- TYPICAL APPLICATIONS---The voltage monitoring relay is typically applied in dc motor, battery,UPS power supply, dc switchgear, dc panel, industrial control system.
Check Stock