Reviews 1 5 Inch

Husky 30849 Round Bar Weight Distribution Hitch with Sway Control

  • Weight Distribution Hitch with bolt-together ball mount/shank assembly and sway control.
  • Black polyester finish resists rust and corrosion. Lift brackets allow safe and easy hitch hook-up. Interchangeable spring bars fit left or right sides of hitch head. Includes assembly hardware and chains..
  • 8 inch total height adjustment, rise is 5-5/8 inch, drop is 2-3/8 inch, shank length is 10 inch, ball to pin hole is 12-3/4 inch. Dual sway control platform Balls not included 1-1/4 inch hole on head assembly requires 1-1/4 inch shank on trailer ball.
  • Weight distribution hitch rated up to 1,200 pounds - Gross trailer weight 12,000 pounds.
  • 2-5/16 inch trailer ball and sway control included.
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

ABN Snap Ring Pliers Set, 11-Piece – .038in - .09in (1-2.3mm) Straight & Bent Retaining Ring Pliers w/ Hook & Pick

  • Reversible joints and adjustable jaw precision screw bit allow for 2 types of function on both internal and external retaining rings.
  • Use included hook and pick tools to clean out gunk, get into hard-to-reach areas, and properly grip dropped clips.
  • GRIP COMFORTABLY: Approximate 3.5-inch to 4-inch (8.9cm to 10.2cm) long vinyl/plastic mixed insulated handles on C clip pliers for a comfortable non-slip grip and ensures less user fatigue and more productivity.
  • BUILT TO LAST: Circlip pliers constructed from heat-treated steel that is perfect for home and garage use and offers maximum strength and longevity that resists rust and corrosion.
  • EASY STORAGE: Snap pliers come packed inside a heavy-duty 12.5” x 3.2” x 9.4” inch (31.8cm x 8.1cm x 23.9cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (8) c ring pliers (4 bent tip pliers – 5.5-inch with 0.038-inch/1mm tips, 5.5-inch with 0.047-inch/1.2mm tips, 7.5-inch with 0.070-inch/1.8mm tips, 8.5-inch with 0.090-inch/2.3mm tips.
  • 4 straight tip pliers – 6-inch with 0.038-inch/1mm tips, 6-inch with 0.047-inch/1.2mm tips, 8-inch with 0.070-inch/1.8mm tips, 9-inch with 0.090-inch....
Check Stock

Two Cherries 500-1575 6-Piece Chisel Set with Custom Leather Roll

  • SHARPENED CHISEL HEADS - Accurately pre-sharpened by machine for all chisels..
  • BLADE - 60 Chrome-Vanadium blades outlast high carbon steel and will give you years of use..
  • HANDLE - Walnut wooden handle is harder and comfortable for using..
  • WOODEN BOX - Enhanced all parts includes double layer panels, enlarged structure, thickened hinge, packaging in mail box with EPE protection, to keep the turning tools and case in good condition..
  • CONTENTS - 4 x Straight Gouge: 1/4-Inch, 3/8-Inch, 5/8-Inch, 1-Inch.
  • 2 x V-Straight Parting: 5/8-Inch, 9/16-Inch.
Check Stock

Metal Clips for Rope, Cord, String - Heavy Duty Zinc Plated Double Rope Clamps (1 Inch, 10 Pack)

  • ZINC CLIPS WITH LUXURY FLAIR: The attractive zinc plated color of Paracord Planet’s rope clamps give them an ultra-stylish finish and chic appearance. Easy to use, and efficient, our rope clamps can effectively clamp all rope, and other cordage, within a wide range of sizes. The 1-Inch size fits two 1/2-Inch ropes, the 1/2-Inch size fits two 1/4-Inch ropes, the 3/4-Inch size fits two 3/8-Inch ropes and the 5/8-Inch size fits two 5/16-Inch ropes..
  • MULTIPURPOSE ROPE CLAMP: Our rope clamps work great both indoors and outdoors. Use them to create animal and pet leashes, leads for horses, fender lines, keychains, or use on your boat, dock, and other marine environments. Our clamps will hold up extreme weather conditions, meaning they work great for sprinklers and flagpoles as well. The possibilities are endless with Paracord Planet Metal Rope Clamps..
  • MULTIPLE PACK OPTIONS: Available in 2-Pack, 3-Pack, 5-Pack, and 10-Pack options. Our rope clamps come in an attractive zinc platted color and are available in multiple size options including: 1-Inch (fitting two 1/2-Inch ropes), 1/2-Inch (fitting two 1/4-Inch ropes), 3/4-Inch (fitting two 3/8-Inch ropes), and 5/8-Inch (fi....
Check Stock

32 Pcs Upgrade Original Thread Checker Inch & Metric - Size Gauge Measuring Tool for Imperial and Metric Nuts ，32 Male/Female Gauges - 17 Inch & 15 Metric

  • Each size has a nut and bolt checker on the same gauge. 32 male/female gauges - 17 inch & 15 metric.The Thread Checker is especially well suited for distinguishing between similar inch and metric threads..
  • Thread sizes are permanently stamped onto each gauge (inch in Black, metric in white).The individual gauges rotate freely on the wire cable for fast thread verification..
  • We've added imperial and metric specifications to make it more complete than the models available on the market.These nut & bolt thread checkers are made of strong stainless steel，Inch gauges are clear zinc plated, metric gauges are black oxide..
  • Black Oxide for Metric Size:Includes 15 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75,M14x2.0,M16x1.5,M16x2.0..
  • Zinc Plated for Inch Size: Includes 17 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-18,5/8-11,5/8-11..
Check Stock

Husky 1/2 In. Drive SAE Deep Impact Socket Set (11-piece)

  • ...dium steel with heat treatment and chrome flash for durability ensures the strength and rust-resistance of tools..
  • The reversible ratchet with quick release mechanism improves efficiency and performance..
  • Set includes:20-piece 1/4 inch drive regular sockets of SAE & Metric size (5/32'', 3/16'', 7/32'', 1/4'', 9/32'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'' &5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm).
  • 12-piece 1/4 inch drive deep sockets of SAE & Metric size (1/4'',9/32'',5/16'',11/32'',3/8'',7/16'' & 6, 7, 8, 9, 10, 11mm).
  • 12-piece nut bits of SAE & Metric size (1/4'',9/32'',5/16'',11/32'',3/8'',7/16'' & 6, 7, 8, 9, 10, 11mm).
  • 1-piece spinner handle of 1/4'', 1-piece 1/4'' universal jointer.
  • 1-piece 1/4'' drive extension bar of 3 inch.
  • 1-piece 1/4'' drive extension bar of 6 inch.
Check Stock

EasyPAG Desk Drawer Organizer with 3 Small Bins and 1 Long Bin,Purple

  • Durable rolled steel construction, carved hollow flower pattern design desk drawer organizer ,using green paint, no pollution, safe and clean.
  • 3 small bins and 1 long bin accommodate odd-sized office supplies. Deep bins provide extra space for small office supplies.
  • Extra-long pen and pencil compartment means no more jumbled writing supplies.
  • Can be used on top of your desk, inside a drawer, or on a shelf.
  • left & right small bins 3-5/8 x 2-3/4 x 2-1/8 inch ,middle small bins 3-3/8 x 2-3/4 x 2-1/8 inch ,1 long bin 10-5/8 x 2-7/8 x 2-1/8 inch.
Check Stock

Klein Tools 80027 Screwdriver Set, 11-in-1 Multi-bit Screwdriver, 6-in-1 Stubby Screwdriver, Phillips, Slotted, Square, Torx Bits, 2-Piece

  • Klein Tools Multi-Bit Screwdriver Tool Kit includes the 11-in-1 multi-bit screwdriver / nut driver (Cat. No. 32500) , and the 6-in-1 multi-bit stubby screwdriver / nut driver (Cat. No. 32561).
  • 11-in-1 multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • 11-in-1 includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • 6-in-1 multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes.
  • 6-in-1 includes non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted.
  • The compact design of the multi-bit stubby features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces.
  • Cushion-Grip handle provide greater torque and comfort.
Check Stock