Get precise measurements every time with our Feeler Gauges Metric. Perfect for ensuring accurate gaps and clearances. No more guesswork! Feeler Gauges Metric Measurements

Stainless Steel Feeler Gauge Universal Standard SAE and Metric Offset Valve Thickness Gauge 32-Piece Blade Tool for Measuring Gap Width/Thickness

  • 【EASY TO USE AND CONVENIENT】Made of high quality stainless steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable, easy and convenient to take and store. Easily measure gap widths with the ABN Valve Offset Feeler Gauge. It is great for use on guitars, engines, and so much more. Includes metric and inch sizes etched on each blade..
  • 【BUILT TO LAST】Constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion.
  • Each blade has sizes laser etched for easy identification.
  • Blades are bound within a blade protector to prevent loss of individual blades.
  • 【EASY IDENTIFICATION】 dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.040 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • 【METRIC SIZES (mm)】0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00 mm.
  • 【INCH SIZES(inch)】0.0008, 0.0012, 0.0015, 0.002, 0.0025, 0.0028, 0.003, 0.0036, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.015, 0.016, 0.018, 0.020, 0.022, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.040 Inches.
Check Stock

Nut & Bolt Thread Checker (Inch & Metric), Original Version (SWTC-26)

  • Each Size Has A Nut And Bolt Checker On The Same Gauge. 26 Male/Female Gauges - 14 Inch & 12 Metric.
  • Thread Sizes Are Permanently Stamped Onto Each Gauge (Inch In Red, Metric In White).
  • Inch Gauges Are Clear Zinc Plated, Metric Gauges Are Black Oxide.
  • The Individual Gauges Rotate Freely On The Wire Cable For Fast Thread Verification.
Check Stock

StewMac Angle Gauge

  • A simple and fast way to consistently set the gap between strings and pickups.
  • Fret a string at the last fret, slide a gauge under it, and raise the pickup until the polepiece touches the gauge.
  • Made of non-magnetic brass, so it won't stick to the polepieces, making it more practical than steel rulers or feeler gauges.
  • Set of 4 gauges in the following thicknesses: 1/32", 1/16", 3/32" and 1/8".
Check Stock

ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool

  • ✔Feeler Gauge Sets: Including 65 manganese steel feeler with 32-blade and offset feeler gauge with 16-blade, made of 65 manganese steel, 65 manganese steel is more resistant to wear&tear and has higher strength than stainless steel, features high precision and hardness, good elasticity and wear resistance..
  • ✔Easy to identify: metric and imperial double marking, laser technology etched out the size of the number, in light at a glance its specifications, easy to identify..
  • ✔Feeler Gauge with 32-Blade Measurement: 0.0015 inch to 0.035 inch(0.04 mm to 0.88 mm), please see the second picture for size details.Offset Feeler Gauge with 16-Blade Measurement: 0.005 inch to 0.020 inch (0.127 mm to 0.508 mm), please see the third picture for size details..
  • ✔Unique Design: The blades are bound within a chromed-blade protector to prevent loss of individual blades, designed with a thumb notch for easy selection and expansion, and it can be moved 360 degrees and disassembled if you want to use one alone..
  • ✔NOTICE:This product is a feeler gauge, used to measure the size of the gap spacing. If you need to measure the thickness of some articles, you can buy the wire diameter gauge of our shop, which has the supporting thickness gauge. Thank you for your cooperati....
Check Stock

4 Pieces Stainless Steel Feeler Gauges Dual Marked Metric Feeler Gauge SAE Offset Valve Thickness Gauge 32-Blade Feeler Gauge Measuring Spark Plug Tool for Measuring Width Thickness

  • Feeler fauge sets: package contains 4 pieces of 32-pieces feeler gauge (measurement: 0.0015-0.035 inch/ 0.04-0.88 mm), adequate size to meet your use and replacement needs.
  • Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps and other hard to reach places.
  • Quality material: made of 65 manganese steel, each spark plug gap measuring tool is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
  • Easy to identify: dual marked metric and SAE, through the fine manufacturing process, the number of sizes in the feeler gauge and its specifications are clear at a glance and easy to identify.
  • Warm tip: stainless steel feeler gauge has some anti-rust oil to prevent rust, please do not worry.
  • Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corrosion, bending, deformation and damage, simple and convenient.
Check Stock

32 Pcs Upgrade Original Thread Checker Inch & Metric - Size Gauge Measuring Tool for Imperial and Metric Nuts ，32 Male/Female Gauges - 17 Inch & 15 Metric

  • Each size has a nut and bolt checker on the same gauge. 32 male/female gauges - 17 inch & 15 metric.The Thread Checker is especially well suited for distinguishing between similar inch and metric threads..
  • Thread sizes are permanently stamped onto each gauge (inch in Black, metric in white).The individual gauges rotate freely on the wire cable for fast thread verification..
  • We've added imperial and metric specifications to make it more complete than the models available on the market.These nut & bolt thread checkers are made of strong stainless steel，Inch gauges are clear zinc plated, metric gauges are black oxide..
  • Black Oxide for Metric Size:Includes 15 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75,M14x2.0,M16x1.5,M16x2.0..
  • Zinc Plated for Inch Size: Includes 17 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-18,5/8-11,5/8-11..
Check Stock

Stanley Proto J00MM25 25 Blade Metric Feeler ga Set

  • 1/2-inch x 3-5/16-inch metric blades in steel holder.
  • Sizes: 0.04mm, 0.05mm, 0.06mm, 0.07mm, 0.08mm, thru 1.00mm.
  • Twenty-five blade metric feeler gauge set.
Check Stock

CAMWAY Digital Caliper Waterproof + 32PCS Feeler Gauge, Digital Caliper 150 mm,6 Inch Stainless Steel Electronic Vernier Caliper Fractions/Inch/Metric Measuring Tool

  • ... for differential measuring,The smart design of the durable and portable Caliper allows you to set zero by a button and start a new measurement at any point of the Caliper scale,Specially,The Stainless Steel Digital Caliper helps you get precise results quickly and easily on The large LCD display Screen.
  • 【Included Feeler Gauge】With 1 x Electronic Digital Caliper，1 x Sturdy Plastic Case，1 x Extra LR44 Battery，1 x Mini Screwdriver，1 x User Manual,1 x Feeler Gauge(Dual marked metric and imperial the specification of every blade was clearly marked on the Stainless Steel Feeler Gauge surface with laser technology, conveniently for measuring the thickness of tappet clearances, spark plugs gaps, bearing clearances and piston ring gaps.).
Check Stock

Feeler Gauges Metric

Hey, folks! Today we're diving straight into the world of feeler gauges. If you're a DIY enthusiast or a professional mechanic, you know how important these little tools are for measuring gaps and clearances. No need for fluff and lengthy explanations here. We're going to cut right to the chase and give you the lowdown on the 8 best feeler gauges metric out there.

1. [Product 1]: This bad boy tops our list with its precise measurements, durable build, and user-friendly design. It's a must-have for any mechanic worth their salt.

2. [Product 2]: Don't underestimate the power of this feisty feeler gauge. Its compact size and accurate readings make it a reliable companion in any toolbox.

3. [Product 3]: versatility? Look no further. Our third contender offers a wide range of sizes, making it the go-to choice for tackling various projects.

4. [Product 4]: If durability is your game, this feeler gauge has got you covered. Its tough construction can withstand even the roughest handling, making it ideal for heavy-duty tasks.

5. [Product 5]: Need something that won't break the bank? Look here. This budget-friendly option won't compromise on performance, saving you both money and headaches.

6. [Product 6]: Precision is the name of the game with this sixth product. Its ultra-thin blades can effortlessly slide into tight spaces, ensuring accurate measurements every time.

7. [Product 7]: Practicality meets reliability with this feeler gauge. Its user-friendly design and easy-to-read markings make it a dream tool for both professionals and beginners alike.

8. [Product 8]: Last but certainly not least, our eighth pick boasts not only excellent quality but also a sleek and stylish design. Show off your tool game with this beauty.

There you have it, folks. Our no-nonsense list of the 8 best feeler gauges metric that will elevate your DIY and mechanical projects to a whole new level. what are you waiting for? Choose the one that suits your needs and get ready to measure like a pro!